CHARACTERIZATION AND ANALYSES ON RESIDUAL STRESS AND DEFORMATION DISTRIBUTION IN LINE HEAT PROCESS

被引：0

作者：

Zhou B. ^{[1
]}

Han X. ^{[2
]}

Guo W. ^{[2
]}

Liu Z. ^{[2
]}

Tan S.-K. ^{[3
]}

机构：

[1] School of Naval Architecture and Ocean Engineering, Dalian University of Technology

[2] Maritime Research Centre, Nanyang Technological University

[3] School of Civil and Environmental Engineering, Nanyang Technological University

来源：

Transactions of the Royal Institution of Naval Architects Part A: International Journal of Maritime Engineering | 2016年 / 158卷 / A4期

关键词：

Finite element method - Numerical methods - Ships - Shipyards;

D O I：

10.5750/ijme.v158iA4.1001

中图分类号：

学科分类号：

摘要：

Line heating is an important plate bending process that has been adopted in shipyards for more than 60 years. This paper presents the results of a numerical and experimental study on the residual deformation and stress distribution in the plate forming process using the line heating method. In this paper, a finite element model was used to simulate the heating process, and the model was validated using experimental results. The model was then used to analyze the deformation and stress distributions in the heating and non-heating region. The impact of line heating and sequence of heating on both sides of a steel plate was discussed. The findings of the study show that the compression stress generated help to increase the shrinkage of line heating process. This study presents a valuable reference for similar thermal process. © 2016: The Royal Institution of Naval Architects.

引用

页码：A315 / A324

页数：9

共 50 条

[21] Influence of GaAs crystal anisotropy on deformation behavior and residual stress distribution of nanoscratching
Xianghua Xu
Wengang Fan
Baozhen Li
Jianguo Cao
Applied Physics A, 2021, 127
[22] Investigation on influences of polymer solution properties on stress distribution and deformation of residual oil
Liu, Lili
Wang, Lihui
Song, Hua
Bai, Mingxing
ENGINEERING APPLICATIONS OF COMPUTATIONAL FLUID MECHANICS, 2020, 14 (01) : 401 - 410
[23] Simulation of prestressed ultrasonic peen forming on bending deformation and residual stress distribution
Zhang, Tao (297zhangtao@nuaa.edu.cn), 1600, Springer London (98): : 1 - 4
[24] Influence of GaAs crystal anisotropy on deformation behavior and residual stress distribution of nanoscratching
Xu, Xianghua
Fan, Wengang
Li, Baozhen
Cao, Jianguo
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2021, 127 (09):
[25] Simulation of prestressed ultrasonic peen forming on bending deformation and residual stress distribution
Tao Zhang
Lei Li
Shi–hong Lu
Hai Gong
The International Journal of Advanced Manufacturing Technology, 2018, 98 : 385 - 393
[26] Thermo-Mechanical Deformation History and the Residual Stress Distribution in Cold Spray
Enqiang Lin
Isaac Nault
Ozan C. Ozdemir
Victor K. Champagne
Aaron Nardi
Sinan Müftü
Journal of Thermal Spray Technology, 2020, 29 : 1424 - 1436
[27] Thermo-Mechanical Deformation History and the Residual Stress Distribution in Cold Spray
Lin, Enqiang
Nault, Isaac
Ozdemir, Ozan C.
Champagne, Victor K., Jr.
Nardi, Aaron
Muftu, Sinan
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2020, 29 (06) : 1424 - 1436
[28] Prediction of Residual Stress Caused by IML Process and Deformation Due to Thermal Impact
Lee, Jaewon
Jang, Eugene
Shin, Seungwon
Park, Seungho
Chung, Haseung
TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2010, 34 (03) : 375 - 382
[29] Effects of milling process sequence on the residual stress related monolithic components deformation
Huang, Xiaoming
2017 2ND INTERNATIONAL CONFERENCE ON MECHATRONICS AND INFORMATION TECHNOLOGY (ICMIT 2017), 2017, : 301 - 306
[30] Prediction of microstructure, residual stress, and deformation in laser powder bed fusion process
Y. P. Yang
M. Jamshidinia
P. Boulware
S. M. Kelly
Computational Mechanics, 2018, 61 : 599 - 615

← 1 2 3 4 5 →