Tribological research advance of PEEK and its composites

被引:0
|
作者
Zhang, Renji [1 ]
Feng, Xiancan [1 ]
机构
[1] Tsinghua Univ., Beijing 100084, China
关键词
Bearings (machine parts) - Composite materials - Gears - Plasma applications - Tribology - Wear of materials;
D O I
暂无
中图分类号
学科分类号
摘要
A tribological research advance in recent years for PEEK and its composites were described as following three aspects: Research about friction and wear properties; Research about the transferred film formed during sliding; Research about the wear debris. The tribological properties of bearing and gear of PEEK composites were discussed. The comparison of tribological tests for the plasma treatment specimen and the grain-reinforced specimen of PEEK and its composites was made. It is shown that the tribological properties are improved a lot. These research are useful for the industrial applications of PEEK and its composites.
引用
收藏
页码:1 / 8
相关论文
共 50 条
  • [41] A study on tribological performances of PEEK and PTFE based composites with MoS2 reinforcements
    Guru, Soumya Ranjan
    Panda, Sandip
    Kumar, Prabhat
    Sarangi, Mihir
    POLYMER COMPOSITES, 2024, 45 (08) : 7329 - 7345
  • [42] Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication
    Chen, Beibei
    Wang, Jianzhang
    Yan, Fengyuan
    TRIBOLOGY INTERNATIONAL, 2012, 52 : 170 - 177
  • [43] Synthesis and characterization of engineered PEEK-based composites for enhanced tribological and mechanical performance
    Javaid, Sabah
    Dey, Maharshi
    Matzke, Caleb
    Gupta, Surojit
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (39)
  • [44] Effect of cryogenic aging and test-environment on the tribological and mechanical properties of PEEK composites
    Nikonovich, Maksim
    Ramalho, Amilcar
    Emami, Nazanin
    TRIBOLOGY INTERNATIONAL, 2024, 194
  • [45] The effect of micron-graphite particle size on the mechanical and tribological properties of PEEK Composites
    Shang, Yingshuang
    Zhao, Yunping
    Liu, Yifan
    Zhu, Ye
    Jiang, Zhenhua
    Zhang, Haibo
    HIGH PERFORMANCE POLYMERS, 2018, 30 (02) : 153 - 160
  • [46] The research on the tribological properties of C/C composites
    Wang, Wenxia
    APPLICATIONS OF ENGINEERING MATERIALS, PTS 1-4, 2011, 287-290 : 675 - 678
  • [47] Tribological and mechanical behavior of tantalum and its compounds reinforced PEEK coatings for TKR
    Huo, Haoling
    Cao, Lin
    Li, Jie
    Lin, Huaijun
    Wang, Qiwei
    Yang, Xusheng
    Zang, Chuanjun
    Zhang, Jingtao
    Zhang, Peng
    Li, Wei
    SURFACE & COATINGS TECHNOLOGY, 2023, 472
  • [48] Research progress in carbon fiber sizing agents for PEEK composites
    Xing Yu
    Zhang Daijun
    Wang Chengbo
    Ni Hongjiang
    Li Jun
    Chen Xiangbao
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2022, 50 (08): : 70 - 81
  • [49] Research Status of Carbon Fibre-reinforced PEEK Composites
    Liang, Qunqun
    Wu, Xiaoqing
    RESEARCH IN MATERIALS AND MANUFACTURING TECHNOLOGIES, PTS 1-3, 2014, 835-836 : 225 - +
  • [50] Tribological performance of 3D printed neat and carbon fiber reinforced PEEK composites
    Dhakal, Nayan
    Espejo, Cayetano
    Morina, Ardian
    Emami, Nazanin
    TRIBOLOGY INTERNATIONAL, 2024, 193