Study of surface quality in machining nickel-based alloy Inconel 718

被引：0
|
作者：
National and Local United Engineering Laboratory of High-Efficiency Cutting and Tool Technology, Harbin University of Science and Technology, Harbin 150080, China [1 ]
不详 [2 ]
不详 [3 ]
机构：
[1] [1,Fan, Yi Hang
[2] Hao, Zhao Peng
[3] Zheng, Min Li
[4] Sun, Feng Lian
[5] Yang, Shu Cai
来源：
Hao, Z.P. (hzp1911@163.com) | 1600年 / Springer London卷 / 69期
关键词：
In machining operation; the surface quality is one of the most important requirements for many workpieces. Because of the special physical and chemical properties; good-machined surface quality becomes a key issue to solve in machining Inconel 718. In this paper; PVD-TiAlN-coated carbide tools were used to turn Inconel 718. Based on observing the tool wear and machined surface morphology; the main factors affecting surface quality at different cutting speeds were analyzed. The optimal cutting temperature was calculated; according to the above analysis and Archard adhesion wear model; and further cutting parameters optimization was conducted; on the basis of the proposed optimal cutting temperature. The optimized cutting parameters based on optimal cutting temperature can be considered to improve surface quality. © Springer-Verlag London 2013;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：9 / 12
相关论文
共 50 条
  • [41] An experimental study on investigation of machining of nickel based super alloy 718
    Qadri, S. I. A.
    Harmain, G. A.
    Wani, M. F.
    MATERIALS TODAY-PROCEEDINGS, 2019, 19 : 541 - 545
  • [42] Milling Mechanism and Chattering Stability of Nickel-Based Superalloy Inconel 718
    Zheng, Jin
    Zhang, Yaoman
    Qiao, Hanying
    MATERIALS, 2023, 16 (17)
  • [43] Investigation of the Cavitation Erosion Behavior of Inconel 718 Nickel-based Superalloy
    Chen T.
    Li Z.
    Du S.
    Lu L.
    Yu H.
    Wang Q.
    Yang K.
    Zhang Y.
    Mocaxue Xuebao/Tribology, 2020, 40 (04): : 415 - 423
  • [44] Effect of workpiece microstructure on tool wear behavior and surface quality during machining Inconel 718 alloy
    Tian, Pengfei
    He, Lin
    Zhou, Tao
    Du, Feilong
    Zou, Zichuan
    Zhou, Xiaorong
    Jiang, Hongwan
    TRIBOLOGY INTERNATIONAL, 2022, 175
  • [45] Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy
    Basim A. Khidhir
    Bashir Mohamed
    Journal of Mechanical Science and Technology, 2010, 24 : 1053 - 1059
  • [46] Study on chip formation and surface integrity of nickel-based superalloy Inconel 718 by laser assisted micro-cutting
    Zhao, Beibei
    Xu, Jinkai
    Chen, Guangjun
    Zhai, Changtai
    Zhou, Fei
    Li, Jicheng
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 113 : 34 - 46
  • [47] Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy
    Khidhir, Basim A.
    Mohamed, Bashir
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2010, 24 (05) : 1053 - 1059
  • [48] Identification of Temperatures in Cutting Zone when Dry Machining of Nickel Alloy Inconel 718
    Czan, Andrej
    Sajgalik, Michal
    Holubjak, Jozef
    Zauskova, Lucia
    Czanova, Tatiana
    Martikan, Pavol
    17TH MACHINING INNOVATIONS CONFERENCE FOR AEROSPACE INDUSTRY (MIC 2017), 2017, 14 : 66 - 75
  • [49] Optimization of machining parameters in turning of Inconel 718 Nickel-base super alloy
    Frifita, Wassila
    Ben Salem, Sahbi
    Haddad, Abdelkrim
    Yallese, Mohamed Athmane
    MECHANICS & INDUSTRY, 2020, 21 (02)
  • [50] Numerical analysis and experimental validation of surface roughness and morphology in honing of Inconel 718 nickel-based superalloy
    Yang, Chang-Yong
    Wang, Zhi
    Su, Hao
    Fu, Yu-Can
    Zhang, Nian-Hui
    Ding, Wen-Feng
    ADVANCES IN MANUFACTURING, 2023, 11 (01) : 130 - 142
12345