Study of surface quality in machining nickel-based alloy Inconel 718

被引：0
|
作者：
National and Local United Engineering Laboratory of High-Efficiency Cutting and Tool Technology, Harbin University of Science and Technology, Harbin 150080, China [1 ]
不详 [2 ]
不详 [3 ]
机构：
[1] [1,Fan, Yi Hang
[2] Hao, Zhao Peng
[3] Zheng, Min Li
[4] Sun, Feng Lian
[5] Yang, Shu Cai
来源：
Hao, Z.P. (hzp1911@163.com) | 1600年 / Springer London卷 / 69期
关键词：
In machining operation; the surface quality is one of the most important requirements for many workpieces. Because of the special physical and chemical properties; good-machined surface quality becomes a key issue to solve in machining Inconel 718. In this paper; PVD-TiAlN-coated carbide tools were used to turn Inconel 718. Based on observing the tool wear and machined surface morphology; the main factors affecting surface quality at different cutting speeds were analyzed. The optimal cutting temperature was calculated; according to the above analysis and Archard adhesion wear model; and further cutting parameters optimization was conducted; on the basis of the proposed optimal cutting temperature. The optimized cutting parameters based on optimal cutting temperature can be considered to improve surface quality. © Springer-Verlag London 2013;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [21] Application of a compressed air jet for cleaning of wheel surface in grinding nickel-based super alloy Inconel 718
    Hatami, Omid
    Adibi, Hamed
    Rezaei, Seyed Mehdi
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 233 - 244
  • [22] Effect of Residual Stresses in Surface Layer of Nickel-Based Alloy-Inconel 718 on the Safety Factor of Construction
    Krajewska-Spiewak, Joanna
    Gawlik, Jozef
    ADVANCES IN MANUFACTURING (MANUFACTURING 2017), 2018, : 933 - 940
  • [23] Laser welding of Inconel 718 nickel-based alloy layer-by-layer products
    Voropaev, Alexander
    Stramko, Maxim
    Sorokin, Alexander
    Logachev, Ivan
    Kuznetsov, Mikhail
    Gook, Sergey
    MATERIALS TODAY-PROCEEDINGS, 2020, 30 : 473 - 477
  • [24] A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding
    Wang, Junwei
    Xu, Jijin
    Wang, Xiangfei
    Zhang, Xiaoqiang
    Song, Xuefeng
    Chen, Xiaoqi
    MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (01) : 61 - 69
  • [25] Effect of energy distribution on the machining efficiency and surface morphology of Inconel 718 nickel-based superalloy using plasma electrolytic polishing
    Zhou, Chuanqiang
    Qian, Ning
    Su, Honghua
    Zhang, Zhao
    Ding, Wenfeng
    Xu, Jiuhua
    SURFACE & COATINGS TECHNOLOGY, 2022, 441
  • [26] Effect of Traverse Speed on Abrasive Waterjet Machining of Age Hardened Inconel 718 Nickel-Based Superalloy
    Ay, Mustafa
    Caydas, Ulas
    Hascalik, Ahmet
    MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (10) : 1160 - 1165
  • [27] Effects of Machining Parameters on Finishing Additively Manufactured Nickel-Based Alloy Inconel 625
    Fei, Jixiong
    Liu, Guoliang
    Patel, Kaushalendra
    Ozel, Tugrul
    JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2020, 4 (02):
  • [28] Joint strength and interfacial microstructure in silicon nitride/nickel-based Inconel 718 alloy bonding
    WOO-CHUN LEE
    Journal of Materials Science, 1997, 32 : 221 - 228
  • [29] Dynamic Hardening Equation of Nickel-based Superalloy Inconel 718
    Ahn, Kwanghyun
    Huh, Hoon
    ADVANCES IN ENGINEERING PLASTICITY XI, 2013, 535-536 : 129 - 132
  • [30] Mechanical and Corrosion Behavior of Inconel 718 Nickel-Based Super Alloy Doped with Graphene Nanoplatelets
    Khotso Khoele
    David Jacobus Delport
    Journal of Failure Analysis and Prevention, 2019, 19 : 1493 - 1497
12345