Study of surface quality in machining nickel-based alloy Inconel 718

被引：0
|
作者：
National and Local United Engineering Laboratory of High-Efficiency Cutting and Tool Technology, Harbin University of Science and Technology, Harbin 150080, China [1 ]
不详 [2 ]
不详 [3 ]
机构：
[1] [1,Fan, Yi Hang
[2] Hao, Zhao Peng
[3] Zheng, Min Li
[4] Sun, Feng Lian
[5] Yang, Shu Cai
来源：
Hao, Z.P. (hzp1911@163.com) | 1600年 / Springer London卷 / 69期
关键词：
In machining operation; the surface quality is one of the most important requirements for many workpieces. Because of the special physical and chemical properties; good-machined surface quality becomes a key issue to solve in machining Inconel 718. In this paper; PVD-TiAlN-coated carbide tools were used to turn Inconel 718. Based on observing the tool wear and machined surface morphology; the main factors affecting surface quality at different cutting speeds were analyzed. The optimal cutting temperature was calculated; according to the above analysis and Archard adhesion wear model; and further cutting parameters optimization was conducted; on the basis of the proposed optimal cutting temperature. The optimized cutting parameters based on optimal cutting temperature can be considered to improve surface quality. © Springer-Verlag London 2013;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：9 / 12
相关论文
共 50 条
  • [1] Study of surface quality in machining nickel-based alloy Inconel 718
    Fan, YiHang
    Hao, ZhaoPeng
    Zheng, MinLi
    Sun, FengLian
    Yang, ShuCai
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 69 (9-12): : 2659 - 2667
  • [2] Study of surface quality in machining nickel-based alloy Inconel 718
    YiHang Fan
    ZhaoPeng Hao
    MinLi Zheng
    FengLian Sun
    ShuCai Yang
    [J]. The International Journal of Advanced Manufacturing Technology, 2013, 69 : 2659 - 2667
  • [3] Study of cutting deformation in machining nickel-based alloy Inconel 718
    Gao Dong
    Hao Zhaopeng
    Han Rongdi
    Chang Yanli
    Muguthu, J. N.
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2011, 51 (06): : 520 - 527
  • [4] Surface integrity in cryogenic machining of nickel based alloy-Inconel 718
    Pusavec, F.
    Hamdi, H.
    Kopac, J.
    Jawahir, I. S.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (04) : 773 - 783
  • [5] Analysis of Machining Characteristics in Additive Mixed Electric Discharge Machining of Nickel-Based Super Alloy Inconel 718
    Kumar, Anil
    Maheshwari, Sachin
    Sharma, Chitra
    Beri, Naveen
    [J]. MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (08) : 1011 - 1018
  • [6] Deep hole electrical discharge machining of nickel-based Inconel-718 alloy using response surface methodology
    Shao-Hsien Chen
    Kuo-Tai Huang
    [J]. The International Journal of Advanced Manufacturing Technology, 2021, 117 : 3281 - 3295
  • [7] Deep hole electrical discharge machining of nickel-based Inconel-718 alloy using response surface methodology
    Chen, Shao-Hsien
    Huang, Kuo-Tai
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (11-12): : 3281 - 3295
  • [8] Machining of nickel-based super alloy inconel 718 using alumina nanofluid in powder mixed electric discharge machining
    Patel, Rakesh Kumar
    Pradhan, Mohan Kumar
    [J]. MATERIALS RESEARCH EXPRESS, 2023, 10 (03)
  • [9] Corrosion and wear behaviors of Inconel 718 nickel-based alloy by boroaluminizing
    Tang, Zikun
    Yang, Chen
    Duan, Yonghua
    Ma, Lishi
    Zheng, Shanju
    Li, Mengnie
    [J]. SURFACE & COATINGS TECHNOLOGY, 2024, 478
  • [10] EXPERIMENTAL INVESTIGATION ON SURFACE INTEGRITY OF END MILLING NICKEL-BASED ALLOY-INCONEL 718
    Cai, Xiaojiang
    Qin, Sheng
    Li, Junli
    An, Qinglong
    Chen, Ming
    [J]. MACHINING SCIENCE AND TECHNOLOGY, 2014, 18 (01) : 31 - 46
12345