The impact of the cast-iron semi-finished product hardness on the surface quality after the machining process

被引：0

作者：

David, Suchánek ^{[1
]}

Karel, Dušák ^{[1
]}

机构：

[1] Department of Machining and Assembly, Faculty of Mechanical Engineering, Technical University of Liberec, Czech Republic

来源：

Manufacturing Technology | 2011年 / 11卷

关键词：

Machining centers - Milling (machining) - Surface properties - Hardness - Cast iron;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

This paper deals with the assessment of the impact of the semi-finished product hardness and the cutting conditions of machining process on the surface roughness of the workpiece after machining. The paper shows that the hardness of the material machined layer and also its inhomogeneity have an impact on the resultant quality of the machined surface. The appreciable impact on the surface quality has also the cutting conditions size affecting at the same time the machining temperature. The machining process took place in the company WIKOV MGI J.S.B. in Hronov on the machine Hedelius BC 100 with the face-milling cutter that was attached with the replaceable cutting tips made from the sintered carbide by the company KENNAMETAL. The machining material was a cast-iron.

引用

页码：66 / 70

共 39 条

[31] Effect of machining parameters on surface roughness for compacted graphite cast iron by analyzing covariance function of Gaussian process regression
Lu, Juan
Zhang, Zhenkun
Yuan, Xuepeng
Ma, Junyan
Hu, Shanshan
Xue, Bin
Liao, Xiaoping
MEASUREMENT, 2020, 157
[32] Effect of machining parameters on surface roughness for compacted graphite cast iron by analyzing covariance function of Gaussian process regression
Lu, Juan
Zhang, Zhenkun
Yuan, Xuepeng
Ma, Junyan
Hu, Shanshan
Xue, Bin
Liao, Xiaoping
Measurement: Journal of the International Measurement Confederation, 2020, 157
[33] The influence of process parameters on machined surface layer quality after wire electrodischarge machining (WEDM)
ZyburaSkrabalak, M
Ruszaj, A
ADVANCED MANUFACTURING PROCESSES, SYSTEMS, AND TECHNOLOGIES (AMPST 96), 1996, : 383 - 390
[34] A surface and sub-surface quality evaluation of three cast iron grades after grinding under various cutting conditions
Da Silva, Rosemar Batista
Silveira Lima, Mariana Landim
Pereira, Mayara Fernanda
Abrao, Bruno Souza
Ribeiro Da Silva, Leonardo Rosa
Bianchi, Eduardo Carlos
Machado, Alisson Rocha
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (5-8): : 1839 - 1852
[35] A surface and sub-surface quality evaluation of three cast iron grades after grinding under various cutting conditions
Rosemar Batista Da Silva
Mariana Landim Silveira Lima
Mayara Fernanda Pereira
Bruno Souza Abrão
Leonardo Rosa Ribeiro Da Silva
Eduardo Carlos Bianchi
Alisson Rocha Machado
The International Journal of Advanced Manufacturing Technology, 2018, 99 : 1839 - 1852
[36] COERCIMETRIC INSTRUMENTS FOR THE QUALITY-CONTROL OF SURFACE STRENGTHENING, STRUCTURE, AND MECHANICAL-PROPERTIES OF ROLLED STOCK, HEAT-TREATED STEEL, AND CAST-IRON PRODUCTS
GORKUNOV, ES
SURIN, GV
BARAZ, EM
KOGAN, LK
TARTACHNAYA, MV
KOROLEV, AL
RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 1993, 29 (05) : 361 - 364
[37] Impact of flow rate on corrosion of cast iron and quality of re-mineralized seawater reverse osmosis (SWRO) membrane product water
Liang, Juan
Deng, Anqi
Xie, Rongjing
Gomez, Mylene
Hu, Jiangyong
Zhang, Jufang
Ong, Choon Nam
Adin, Avner
DESALINATION, 2013, 322 : 76 - 83
[38] SiO2 particle erosion of spheroidal graphite cast iron after surface remelting by the plasma transferred arc process
Dai, WS
Chen, LH
Lui, TS
WEAR, 2001, 248 (1-2) : 201 - 210
[39] Influence of machining with ceramic brushes on the surface quality of EN-AW 7075 aluminum alloy after abrasive waterjet process
Matuszak, Jakub
2021 IEEE 8TH INTERNATIONAL WORKSHOP ON METROLOGY FOR AEROSPACE (IEEE METROAEROSPACE), 2021, : 344 - 348

← 1 2 3 4 →