The impact of the cast-iron semi-finished product hardness on the surface quality after the machining process

被引：0
|
作者：
David, Suchánek [1 ]
Karel, Dušák [1 ]
机构：
[1] Department of Machining and Assembly, Faculty of Mechanical Engineering, Technical University of Liberec, Czech Republic
来源：
Manufacturing Technology | 2011年 / 11卷
关键词：
Machining centers - Milling (machining) - Surface properties - Hardness - Cast iron;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
This paper deals with the assessment of the impact of the semi-finished product hardness and the cutting conditions of machining process on the surface roughness of the workpiece after machining. The paper shows that the hardness of the material machined layer and also its inhomogeneity have an impact on the resultant quality of the machined surface. The appreciable impact on the surface quality has also the cutting conditions size affecting at the same time the machining temperature. The machining process took place in the company WIKOV MGI J.S.B. in Hronov on the machine Hedelius BC 100 with the face-milling cutter that was attached with the replaceable cutting tips made from the sintered carbide by the company KENNAMETAL. The machining material was a cast-iron.
引用
收藏
页码：66 / 70
相关论文
共 39 条
  • [21] INSPECTING THE QUALITY OF HIGH-FREQUENCY INDUCTION SURFACE HARDENING OF CAST-IRON PARTS
    ELISEEV, YE
    NEZEMAEV, SR
    INDUSTRIAL LABORATORY, 1983, 49 (12): : 1296 - 1297
  • [22] CAST-IRON SURFACE-STRUCTURE AND WEAR AFTER AN ANTIFRICTION NONABRASIVE FINISHING TREATMENT
    KUKSENOVA, LI
    RYBAKOVA, LM
    NAZAROV, YA
    METAL SCIENCE AND HEAT TREATMENT, 1993, 35 (9-10) : 499 - 504
  • [23] DEVELOPMENT OF A LASER SURFACE MELTING PROCESS FOR IMPROVEMENT OF THE WEAR-RESISTANCE OF GRAY CAST-IRON
    BLARASIN, A
    CORCORUTO, S
    BELMONDO, A
    BACCI, D
    WEAR, 1983, 86 (02) : 315 - 325
  • [24] Experience in Developing Digital Twins Of Melting Processes in EAF for Solving Technological Problems of Producing a Semi-Finished Product with Required Quality Characteristics
    A. A. Safronov
    L. V. Ronkov
    A. N. Mal’ginov
    I. A. Ivanov
    I. A. Shchepkin
    V. K. Yashchenko
    A. N. Tokhtamyshev
    Metallurgist, 2022, 65 : 1299 - 1310
  • [25] Experience in Developing Digital Twins Of Melting Processes in EAF for Solving Technological Problems of Producing a Semi-Finished Product with Required Quality Characteristics
    Safronov, A. A.
    Ronkov, L., V
    Mal'ginov, A. N.
    Ivanov, I. A.
    Shchepkin, I. A.
    Yashchenko, V. K.
    Tokhtamyshev, A. N.
    METALLURGIST, 2022, 65 (11-12) : 1299 - 1310
  • [26] Demerit control chart as a decision support tool in quality control of ductile cast-iron casting process
    Sika, Robert
    Rogalewicz, Michal
    8TH INTERNATIONAL CONFERENCE ON MANUFACTURING SCIENCE AND EDUCATION (MSE 2017) - TRENDS IN NEW INDUSTRIAL REVOLUTION, 2017, 121
  • [27] Effect of Increased Copper and Iron Contents on the High Temperature Pretreatment as well as on the Properties of Semi-Finished Products from Continuous-Cast AlMgSi Alloys.
    Cyrener, Eva
    1600, (30):
  • [28] MECHANISM OF SURFACE-LAYER HARDENING IN IMPACT-ABRASIVE WEAR OF HIGH-CHROMIUM CAST-IRON
    KOMAROV, OS
    IVASHKIN, VV
    URBANOVICH, NI
    METAL SCIENCE AND HEAT TREATMENT, 1990, 32 (3-4) : 278 - 280
  • [29] Analysis of the Impact of Changes in Thermomechanical Properties of Annealed Semi-Crystalline Plastics on the Surface Condition after the Machining Process
    Gnatowski, Adam
    Golebski, Rafal
    Sikora, Piotr
    Petru, Jana
    Hajnys, Jiri
    MATERIALS, 2023, 16 (13)
  • [30] Trade-off analysis of tool wear, machining quality and energy efficiency of alloy cast iron milling process
    Luan, Xiaona
    Zhang, Song
    Li, Jianfeng
    Mendis, Gamini
    Zhao, Fu
    Sutherland, John W.
    46TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 46, 2018, 26 : 383 - 393
1234