Effect of thermal-mechanical cycle on recovery stress of Fe-Mn-Si-Cr-Ni shape memory alloy

被引：0
|
作者：
Li, N. [1 ]
Wen, Y.H. [1 ]
Xi, H.P. [1 ]
Tu, M.J. [1 ]
Li, P.Q. [1 ]
Liu, Y.L. [1 ]
Ma, Y.L. [1 ]
机构：
[1] Dep. of Materials Shaping, Sichuan Univ., Chengdu 610065, China
来源：
Gongneng Cailiao/Journal of Functional Materials | 2000年 / 31卷 / 06期
关键词：
Deformation - Iron alloys - Quenching - Thermal effects - Thermal stress;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of thermal-mechanical cycle on the recovery stress of Fe-18 Mn-5Si-8Cr-4Ni shape memory alloy has been studied. Results show that the maximum recovery stress in heating, δh, will increase as the cycle number increases, when the number is below 2. A maximum value, 156 MPa, can be attained at 2, which is 108% higher than that of specimen free of cycle. When the number is over 2, δh will decease. The recovery stress at room temperature after heating, δc, increases with the increase of cycle number. A maximum value, 255 MPa, can be attained at 3, which is 70% higher than that of specimen free of cycle; however, further increase in cycle number has little effect on δc, when the number is over 3. The recovery stress of Fe-18 Mn-5 Si-8 Cr-4 Ni shape memory alloy can be improved by the thermal-mechanical cycle.
引用
收藏
页码：601 / 602
相关论文
共 50 条
  • [31] Anomalous cyclic oxidation behaviour of a Fe-Mn-Si-Cr-Ni shape memory alloy
    de Sousa Malafaia, Artur Mariano
    de Oliveira, Marcelo Falcao
    CORROSION SCIENCE, 2017, 119 : 112 - 117
  • [32] Effect of titanium addition on shape memory effect and recovery stress of training-free cast Fe-Mn-Si-Cr-Ni shape memory alloys
    Wang, Gaixia
    Peng, Huabei
    Sun, Panpan
    Wang, Shanling
    Wen, Yuhua
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 657 : 339 - 346
  • [33] Factors Affecting Transformation Temperatures in Fe-Mn-Si-Cr-Ni Shape Memory Alloy
    Yuhua WEN+
    Journal of Materials Science & Technology, 2000, (05) : 537 - 539
  • [34] Calorimetric measurement of ε-&gtγ transformation of Fe-Mn-Si-Cr-Ni shape memory alloy
    Li, Jianchen
    Sun, Guangping
    Jiang, Qing
    Shen, Ping
    Jinshu Rechuli/Heat Treatment of Metals, (11): : 10 - 11
  • [35] Growth process and microstructure of ε martensite in an Fe-Mn-Si-Cr-Ni shape memory alloy
    J Phy IV JP, 8 pt 1 (C8-451):
  • [36] Effect of nitrogen on shape memory behaviour of Fe-Mn-Si-Cr-Ni alloys
    Ariapour, A
    Perovic, DD
    McLean, A
    MATERIALS FOR SMART SYSTEMS II, 1997, 459 : 357 - 362
  • [37] Effects of Ti on microstructure and properties of Fe-Mn-Si-Cr-Ni shape memory alloy
    Zou, Qin
    Ye, Xihui
    Li, Yanguo
    Luo, Wenqi
    Yang, Xiaowei
    Luo, Yongan
    MATERIALS CHEMISTRY AND PHYSICS, 2023, 293
  • [38] Factors affecting transformation temperatures in Fe-Mn-Si-Cr-Ni shape memory alloy
    Wen, YH
    Li, N
    Tu, MJ
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2000, 16 (05) : 537 - 539
  • [39] The effects of pre-strain, recovery temperature, and bending deformation on shape memory effect in an Fe-Mn-Si-Cr-Ni alloy
    Kirindi, T.
    Sari, U.
    Dikici, M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 475 (1-2) : 145 - 150
  • [40] Research on shape memory effect and corrosion resistance of the pipe joint of Fe-Mn-Si-Cr-Ni base shape memory alloy
    Yang, Jun
    Deng, Long-Jiang
    Lin, Yuan-Hua
    Ding, Wu-Cheng
    Tian, Ren-Jiang
    Li, Ning
    Gongneng Cailiao/Journal of Functional Materials, 2012, 43 (11): : 1389 - 1391
12345