Model based correction of placement error in EBL and its verification

被引:0
|
作者
机构
[1] Babin, Sergey
[2] Borisov, Sergey
[3] Militsin, Vladimir
[4] Komagata, Tadashi
[5] Wakatsuki, Tetsuro
来源
| 1600年 / SPIE卷 / 9984期
关键词
In maskmaking; the main source of error contributing to placement error is charging. DISPLACE software corrects the placement error for any layout; based on a physical model. The charge of a photomask and multiple discharge mechanisms are simulated to find the charge distribution over the mask. The beam deflection is calculated for each location on the mask; creating data for the placement correction. The software considers the mask layout; EBL system setup; resist; and writing order; as well as other factors such as fogging and proximity effects correction. The output of the software is the data for placement correction. One important step is the calibration of physical model. A test layout on a single calibration mask was used for calibration. The extracted model parameters were used to verify the correction. As an ultimate test for the correction; a sophisticated layout was used for the verification that was very different from the calibration mask. The placement correction results were predicted by DISPLACE. A good correlation of the measured and predicted values of the correction confirmed the high accuracy of the charging placement error correction. © 2016 SPIE;
D O I
暂无
中图分类号
学科分类号
摘要
PSISDG
引用
收藏
相关论文
共 50 条
  • [1] Model based correction of placement error in EBL and its verification
    Babin, Sergey
    Borisov, Sergey
    Militsin, Vladimir
    Komagata, Tadashi
    Wakatsuki, Tetsuro
    [J]. PHOTOMASK JAPAN 2016: XXIII SYMPOSIUM ON PHOTOMASK AND NEXT-GENERATION LITHOGRAPHY MASK TECHNOLOGY, 2016, 9984
  • [2] Placement error due to charging in EBL: experimental verification of a new correction model
    Babin, Sergey
    Borisov, Sergey
    Kimura, Yasuki
    Kono, Kenji
    Militsin, Vladimir
    Yamamoto, Ryuji
    [J]. PHOTOMASK AND NEXT-GENERATION LITHOGRAPHY MASK TECHNOLOGY XIX, 2012, 8441
  • [3] Correction of placement error in EBL using model based method
    Babin, Sergey
    Borisov, Sergey
    Militsin, Vladimir
    Komagata, Tadashi
    Wakatsuki, Tetsurou
    [J]. PHOTOMASK TECHNOLOGY 2016, 2016, 9985
  • [4] EBL resist heating error and its correction
    Babin, Sergey
    Kuzmin, Igor
    [J]. PHOTOMASK AND NEXT GENERATION LITHOGRAPHY MASK TECHNOLOGY XIII, PTS 1 AND 2, 2006, 6283
  • [5] Error correction based on verification techniques
    Huang, SY
    Chen, KC
    Cheng, KT
    [J]. 33RD DESIGN AUTOMATION CONFERENCE, PROCEEDINGS 1996, 1996, : 258 - 261
  • [6] Bayesian model of ice thickness and its analysis based on error correction
    Lai, Ming-Yong
    Chen, An-Yu
    Zhang, Xin-Hua
    [J]. Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2011, 38 (10): : 88 - 92
  • [7] Ranging Error Correction Based on a Prior Error Model
    Xiaofei Wang
    Hongkun He
    Yan Xu
    Yang Lei
    [J]. China Communications, 2018, 15 (03) : 91 - 99
  • [8] Ranging Error Correction Based on a Prior Error Model
    Wang, Xiaofei
    He, Hongkun
    Xu, Yan
    Lei, Yang
    [J]. CHINA COMMUNICATIONS, 2018, 15 (03) : 91 - 99
  • [9] Error estimation, error correction and verification in quantum key distribution
    Maroy, Oystein
    Gudmundsen, Magne
    Lydersen, Lars
    Skaar, Johannes
    [J]. IET INFORMATION SECURITY, 2014, 8 (05) : 277 - 282
  • [10] Balance correction and verification of IMU posture error
    Cheng W.
    Chen Z.
    Zhang Y.
    Hu S.
    Chen Y.
    [J]. Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument, 2021, 42 (09): : 202 - 213