Influence of wiper edge on surface integrity for end-milling of Ti-6Al-4V

被引：0

作者：

Di Crescenzo A.D. ^{[1
]}

Mousseigne M. ^{[1
]}

Rubio W. ^{[1
]}

机构：

[1] Institut Clément Ader, Université Fédérale de Toulouse Midi-Pyrénées, 3 rue Caroline Aigle, Toulouse

来源：

International Journal of Machining and Machinability of Materials | 2023年 / 25卷 / 01期

关键词：

end-milling; residual stresses; roughness; surface integrity; Ti-6Al-4V; wiper edge;

D O I：

10.1504/IJMMM.2023.129591

中图分类号：

学科分类号：

摘要：

The present study focuses on the process parameters influencing the surface quality of end-milled parts made of Ti-6Al-4V alloys with wiper edge insert. Part quality is understood here to mean geometric and mechanical surface criteria. The parameters involved are the cutting speed, the feed rate and the axial depth of cut. After preliminary test studies between two similar inserts, one was selected for its better performance. Then roughness and residual stresses were measured across several studies focusing on different cutting parameters. The main results of the study shows that the wiper edge plays a major role towards surface integrity and suppress the influence of feed rate and cutting speed on it. Moreover the surface integrity generated presents a roughness industrially acceptable for finishing (Ra < 0.8 µm) and compressive residual stresses that are positive towards fatigue life. Copyright © 2023 Inderscience Enterprises Ltd.

引用

页码：89 / 110

页数：21

共 50 条

[31] EXPERIMENTAL STUDY ON MICRO END-MILLING PROCESS OF Ti-6Al-4V USING NANOFLUID MINIMUM QUANTITY LUBRICATION (MQL)
Kim, Dae Hoon
Lee, Pil-Ho
Kim, Jung Sub
Moon, Hyungpil
Lee, Sang Won
PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 1, 2014,
[32] Effect of cutting edge radius on end milling Ti-6Al-4V under minimum quantity cooling lubrication-Chip morphology and surface integrity study
Hariprasad, Balaganesan
Selvakumar, S. Joyson
Raj, D. Samuel
WEAR, 2022, 498
[33] Influence of Cutting Conditions on Surface and Sub-Surface Quality of High Speed Dry End Milling Ti-6Al-4V
Safari, H.
Sharif, S.
Izman, S.
JURNAL TEKNOLOGI, 2014, 67 (03):
[34] An experimental and numerical study on the face milling of Ti-6Al-4V alloy: Tool performance and surface integrity
Rao, Balkrishna
Dandekar, Chinmaya R.
Shin, Yung C.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (02) : 294 - 304
[35] Effects of Cutting Angles in Ti-6al-4v Milling Process on Surface Integrity: Influence of Roughness and Residual Stresses on Fatigue Limit
Cellier, Adrien
Chalon, Florent
Grimal-Perrigouas, Virginie
Bonhoure, David
Leroy, Rene
MACHINING SCIENCE AND TECHNOLOGY, 2014, 18 (04) : 565 - 584
[36] THE INFLUENCE OF CUTTING CONDITIONS ON SURFACE INTEGRITY IN HIGH FEED MILLING OF Ti-6Al-4V WITH SUPERCRITICAL CO2 COOLING
Litwa, P.
Wika, K. K.
Zonuzi, A.
Hitchens, C.
MM SCIENCE JOURNAL, 2019, 2019 : 3071 - 3077
[37] On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy
Liu, Chengsong
Liu, Daoxin
Zhang, Xiaohua
He, Guangyu
Xu, Xingchen
Ao, Ni
Ma, Amin
Liu, Dan
SURFACE & COATINGS TECHNOLOGY, 2019, 370 : 24 - 34
[38] A coolant supply strategy based on cutting temperature prediction during the 3-axis end-milling of Ti-6Al-4V
Lee, Woo-Jun
Park, Seong-Hyun
Yoon, Hae-Sung
JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 272 - 281
[39] THE EFFECT OF TOOL EDGE GEOMETRY ON TOOL PERFORMANCE AND SURFACE INTEGRITY IN TURNING TI-6AL-4V ALLOYS
Burhanuddin, Yanuar
Haron, Che Hassan Che
Ghani, Jaharah A.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES II, PTS 1 AND 2, 2011, 264-265 : 1211 - 1221
[40] Influence of ultrasonic peening cutting on surface integrity and fatigue behavior of Ti-6Al-4V specimens
Li Xun
Yang Shenliang
Lu Zhenghui
Zhang Deyuan
Zhang Xiangyu
Jiang Xinggang
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 275

← 1 2 3 4 5 →