Influence of wiper edge on surface integrity for end-milling of Ti-6Al-4V

被引：0
|
作者：
Di Crescenzo A.D. [1 ]
Mousseigne M. [1 ]
Rubio W. [1 ]
机构：
[1] Institut Clément Ader, Université Fédérale de Toulouse Midi-Pyrénées, 3 rue Caroline Aigle, Toulouse
来源：
International Journal of Machining and Machinability of Materials | 2023年 / 25卷 / 01期
关键词：
end-milling; residual stresses; roughness; surface integrity; Ti-6Al-4V; wiper edge;
D O I：
10.1504/IJMMM.2023.129591
中图分类号：
学科分类号：
摘要：
The present study focuses on the process parameters influencing the surface quality of end-milled parts made of Ti-6Al-4V alloys with wiper edge insert. Part quality is understood here to mean geometric and mechanical surface criteria. The parameters involved are the cutting speed, the feed rate and the axial depth of cut. After preliminary test studies between two similar inserts, one was selected for its better performance. Then roughness and residual stresses were measured across several studies focusing on different cutting parameters. The main results of the study shows that the wiper edge plays a major role towards surface integrity and suppress the influence of feed rate and cutting speed on it. Moreover the surface integrity generated presents a roughness industrially acceptable for finishing (Ra < 0.8 µm) and compressive residual stresses that are positive towards fatigue life. Copyright © 2023 Inderscience Enterprises Ltd.
引用
收藏
页码：89 / 110
页数：21
相关论文
共 50 条
  • [21] An Analysis on Temperature & Surface roughness During End Milling of Ti-6Al-4V Alloy
    Samsudeensadham, S.
    Krishnaraj, V.
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 38 - 42
  • [22] SURFACE INTEGRITY OF END MILLED TI-6AL-4V USING THE TIALN COATED TOOL
    Guo, Y. B.
    Sun, Jie
    MSEC 2008: PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2008, VOL 1, 2009, : 163 - 168
  • [23] Geometrical texture and surface integrity in helical milling and ultrasonic vibration helical milling of Ti-6Al-4V alloy
    Chen, Guang
    Zou, Yunhe
    Qin, Xuda
    Liu, Jian
    Feng, Qiang
    Ren, Chengzu
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 278
  • [24] Effects of rotary ultrasonic elliptical machining for side milling on the surface integrity of Ti-6Al-4V
    Liu, Jiajia
    Jiang, Xinggang
    Han, Xiong
    Gao, Ze
    Zhang, Deyuan
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (5-8): : 1451 - 1465
  • [25] Laser Assisted Milling of Ti-6Al-4V ELI with the Analysis of Surface Integrity and its Economics
    Hedberg G.K.
    Shin Y.C.
    Lasers in Manufacturing and Materials Processing, 2015, 2 (3) : 164 - 185
  • [26] Effects of rotary ultrasonic elliptical machining for side milling on the surface integrity of Ti-6Al-4V
    Jiajia Liu
    Xinggang Jiang
    Xiong Han
    Ze Gao
    Deyuan Zhang
    The International Journal of Advanced Manufacturing Technology, 2019, 101 : 1451 - 1465
  • [27] Surface Integrity in Electrical Discharge Machining of Ti-6Al-4V
    Yu, Jianwu
    Xiao, Peng
    Liao, Yushan
    Cheng, Min
    ADVANCES IN ABRASIVE TECHNOLOGY XII, 2009, 76-78 : 613 - +
  • [28] Investigation of surface integrity in conventional grinding of Ti-6Al-4V
    Guo, Guoqiang
    Liu, Zhiqiang
    Cai, Xiaojiang
    An, Qinglong
    Chen, Ming
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 899 - 904
  • [29] Investigation of cutting force and temperature of end-milling Ti-6Al-4V with different minimum quantity lubrication (MQL) parameters
    Liu, Z. Q.
    Cai, X. J.
    Chen, M.
    An, Q. L.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B8) : 1273 - 1279
  • [30] Surface and sub-surface analysis of rotary ultrasonic elliptical end milling of Ti-6Al-4V
    Zhang, Mingliang
    Zhang, Deyuan
    Geng, Daxi
    Liu, Jiajia
    Shao, Zhenyu
    Jiang, Xinggang
    MATERIALS & DESIGN, 2020, 191
12345