Operando X-ray diffraction during laser 3D printing

被引：0
|
作者：
Hocine, Samy [1 ,2 ]
Van Swygenhoven, Helena [1 ,2 ]
Van Petegem, Steven [1 ]
Chang, Cynthia Sin Ting [1 ]
Maimaitiyili, Tuerdi [1 ]
Tinti, Gemma [3 ]
Ferreira Sanchez, Dario [4 ]
Grolimund, Daniel [4 ]
Casati, Nicola [5 ]
机构：
[1] Photons for Engineering and Manufacturing, Paul Scherrer Institut, Forschungsstrasse 111, Villigen PSI,5232, Switzerland
[2] Neutrons and X-rays for Mechanics of Materials, IMX, École Polytechnique Fédérale de Lausanne, Route Cantonale, Lausanne,1015, Switzerland
[3] SLS Detectors Group, Paul Scherrer Institut, Forschungsstrasse 111, Villigen PSI,5232, Switzerland
[4] MicroXAS Beamline, Paul Scherrer Institut, Forschungsstrasse 111, Villigen PSI,5232, Switzerland
[5] Materials Science Beamline, Paul Scherrer Institut, Forschungsstrasse 111, Villigen PSI,5232, Switzerland
来源：
Materials Today | 2020年 / 34卷
关键词：
Laser based additive manufacturing allows to build a designed shape layer-by-layer; offering versatility and flexibility to many metallurgical sectors. The fast cooling rates and repeated heat cycles depending on the laser and scanning parameters are not easily measurable with conventional methods. Thus; advanced predictive computational simulations; required to reduce trial and error lead time; are difficult to validate. A newly developed in operando X-ray diffraction device implemented at a synchrotron beamline; taking advantage of the high brilliance and the fast detectors available; brings the missing link with numerical methods. By performing operando experiments on Ti-6Al-4V with different printing parameters; the temporal evolution of the low and high temperature phases are followed; the heating and cooling rates are measured for the powder and the solid material; and the formation of residual stresses in the β phase is demonstrated. Moreover it is shown that the parameter that has the largest influence on the evolving microstructure is the scanning strategy; introducing a size effect related to the scanning length. © 2019 The Authors;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：30 / 40
相关论文
共 50 条
  • [31] Probing structure development in Poly(vinylidene Fluoride) during "operando" 3-D printing by small and wide angle X-ray scattering
    Ezquerra, Tiberio A.
    Nogales, Aurora
    Garcia-Gutierrez, Mari Cruz
    Rebollar, Esther
    Galvez, Oscar
    Sics, Igors
    Malfois, Marc
    POLYMER, 2022, 249
  • [32] Operando X-Ray Tomoscopy of Laser Beam Welding
    Kamm, Paul Hans
    Boerner, Stephan
    Neu, Tillmann Robert
    Schlepuetz, Christian Matthias
    Dittrich, Dirk
    Banhart, John
    Garcia-Moreno, Francisco
    ADVANCED SCIENCE, 2025, 12 (09)
  • [33] High-resolution 3D X-ray diffraction microscopy: 3D mapping of deformed metal microstructures
    Kutsal, Mustafacan
    Poulsen, Henning Friis
    Winther, Grethe
    Sorensen, Henning Osholm
    Detlefs, Carsten
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2022, 55 (05) : 1125 - 1138
  • [34] EXPLORING 3D X-RAY DIFFRACTION METHOD TO VALIDATE APPROACHES IN MATERIALS MODELLING
    Ramadhan, Ranggi S.
    Al Mamun, Abdullah
    Ball, James A. D.
    Demir, Eralp
    Collins, David M.
    Agius, Dylan
    Mostavafi, Mahmoud
    Knowles, David
    PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 5, 2023,
  • [35] 3D view of mesoscopic internal structure by coherent hard X-ray diffraction
    Nishino, Yoshinori
    Takahashi, Yukio
    Maeshima, Kazuhiro
    Imamoto, Naoko
    Matsubara, Eiichiro
    Ishikawa, Tetsuya
    ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2008, 64 : C118 - C118
  • [36] 3D structure of dendritic and hyper-branched macromolecules by X-ray diffraction
    Petkov, V
    Parvanov, V
    Tomalia, D
    Swanson, D
    Bergstrom, D
    Vogt, T
    SOLID STATE COMMUNICATIONS, 2005, 134 (10) : 671 - 675
  • [37] 3D grain structures from X-ray diffraction contrast tomography.
    Ludwig, Wolfgang
    King, Andrew
    Reischig, Peter
    Herbig, Michael
    Lauridsen, E. M.
    ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2010, 66 : S100 - S100
  • [38] 3D diffractive imaging of nanoparticle ensembles using an x-ray laser
    Ayyer, Kartik
    Xavier, P. Lourdu
    Bielecki, Johan
    Shen, Zhou
    Daurer, Benedikt J.
    Samanta, Amit K.
    Awel, Salah
    Bean, Richard
    Barty, Anton
    Bergemann, Martin
    Ekeberg, Tomas
    Estillore, Armando D.
    Fangohr, Hans
    Giewekemeyer, Klaus
    Hunter, Mark S.
    Karnevskiy, Mikhail
    Kirian, Richard A.
    Kirkwood, Henry
    Kim, Yoonhee
    Koliyadu, Jayanath
    Lange, Holger
    Letrun, Romain
    Lubke, Jannik
    Michelat, Thomas
    Morgan, Andrew J.
    Roth, Nils
    Sato, Tokushi
    Sikorski, Margin
    Schulz, Florian
    Spence, John C. H.
    Vagovic, Patrik
    Wollweber, Tamme
    Worbs, Lena
    Yefanov, Oleksandr
    Zhuang, Yulong
    Maia, Filipe R. N. C.
    Horke, Daniel A.
    Kuepper, Jochen
    Loh, N. Duane
    Mancuso, Adrian P.
    Chapman, Henry N.
    OPTICA, 2021, 8 (01): : 15 - 23
  • [39] An electrochemical cell for operando bench-top X-ray diffraction
    Sottmann, Jonas
    Pralong, Valerie
    Barrier, Nicolas
    Martin, Christine
    JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2019, 52 (02) : 485 - 490
  • [40] 3D X-RAY IMAGE COMPOSITION
    Armeanu, Constantin Catalin
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN-SERIES A-APPLIED MATHEMATICS AND PHYSICS, 2016, 78 (01): : 309 - 320
12345