Poly(L-lactic acid)/deproteinized natural rubber blends with enhanced compatibility

被引：0

作者：

Mahendra, I. Putu ^{[1
]}

Nghia, Phan Trung ^{[2
,3
]}

Phuong, Nguyen Thi Hong ^{[3
]}

Hang, Tring Thi ^{[3
,4
]}

Alias, Nur Fazreen ^{[5
]}

Ismail, Hanafi ^{[5
]}

机构：

[1] Program Studi Kimia, Jurusan Sains, Institut Teknologi Sumatera, Jalan Terusan Ryacudu, Way Huwi, Jati Agung, Lampung Selatan,35365, Indonesia

[2] Center for Rubber Science and Technology, Hanoi University of Science and Technology, 1 Đi C Vit, Bách Khoa, Hà Ni, Viet Nam

[3] School of Chemical Engineering, University of Science and Technology, 1 Đi C Vit, Bách Khoa, Hà Ni, Viet Nam

[4] Viet Nam Institute for Building Material, 235 Nguyn Trãi, Thanh Xuân District, Hà Ni, Viet Nam

[5] School of Materials and Mineral Resources Engineering, Universiti Sains Malaysia, Transkrian, Nibong Tebal, Seberang Perai, Selatan, Penang, Malaysia

来源：

Polimery/Polymers | 2021年 / 66卷 / 02期

关键词：

D O I：

10.14314/POLIMERY.2021.2.3

中图分类号：

学科分类号：

摘要：

PLLA-g-LMWNR (LMWNR - low molecular weight natural rubber) was used as a compatibilizer (1-3 wt %) of poly(L-lactic acid)/deproteinized natural rubber (PLLA/DPNR) blend (95/5 w/w). The LMWNR was prepared using TiO2/ZnO (9: 1 w/w) and H2O2 as co-catalyst. The obtained LMWNR was grafted with 0-12 wt % maleic anhydride (LMWNR-g-MA) and then with PLLA (PLLA-g-LMWNR). A significant improvement in the mechanical properties of the PLLA/DPNR blend was found in the blend that contained 3 wt % PLLA-g-LMWNR. Scanning electron microscopy showed a decrease in the pore diameter from 5.44 to 1.56 µm. The thermal analysis of PLLA/DPNR blends showed that the Tg value of PLLA phase shifted from 63.1 to 61.4°C. These results confirmed that PLLA-g-LMWNR can enhance the compatibility of the PLLA/DPNR blend. © 2021 Industrial Chemistry Research Institute. All rights reserved.

引用

页码：105 / 111

共 50 条

[41] Poly(L-lactic acid)-polyethylene glycol-poly(L-lactic acid) triblock copolymer: A novel macromolecular plasticizer to enhance the crystallization of poly(L-lactic acid)
Li, Le
Cao, Zhi-Qiang
Bao, Rui-Ying
Xie, Bang-Hu
Yang, Ming-Bo
Yang, Wei
EUROPEAN POLYMER JOURNAL, 2017, 97 : 272 - 281
[42] Effects of salts and pH on hydrolytic degradation of poly(L-lactic acid) blends
Oyama, Hideko
Kimura, Maya
Nakamura, Yusuke
Ogawa, Ryohei
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2018, 255
[43] The melting of poly (L-lactic acid)
Hay, James N. (j.n.hay@bham.ac.uk), 1600, Elsevier Ltd (100):
[44] Blends of Poly (L-Lactic Acid) and Glucose Prepared from Mixture Solution
Cao, Dan
Gao, Qinwei
Zhao, Yinping
Ming, Wei
PROCEEDINGS OF THE 2016 INTERNATIONAL CONFERENCE ON BIOLOGICAL ENGINEERING AND PHARMACY (BEP 2016), 2016, 3 : 206 - 209
[45] The melting of poly (L-lactic acid)
Aziz, Azizan A.
Hay, James N.
Jenkins, Michael J.
EUROPEAN POLYMER JOURNAL, 2018, 100 : 253 - 257
[46] Thermal and mechanical properties of biodegradable blends of poly(L-lactic acid) and lignin
Li, JC
He, Y
Inoue, Y
POLYMER INTERNATIONAL, 2003, 52 (06) : 949 - 955
[47] Mechanical and Thermal Properties of Toughened Poly(L-lactic) Acid and Lignin Blends
Mu, Chunyu
Xue, Liyuan
Zhu, Jun
Jiang, Man
Zhou, Zuowan
BIORESOURCES, 2014, 9 (03): : 5557 - 5566
[48] Preparation of Natural Rubber-graft-Poly(lactic acid) Used as a Compatibilizer for Poly(lactic acid)/NR Blends
Sookprasert, Phijittra
Hinchiranan, Napida
MACROMOLECULAR SYMPOSIA, 2015, 354 (01) : 125 - 130
[49] Preparation, Foaming and Characterization of Poly(l-lactic acid))/Poly(d-lactic acid)-Grafted Graphite Oxide Blends
Xu, L. Q.
Zhao, Y. Q.
INTERNATIONAL POLYMER PROCESSING, 2018, 33 (01) : 127 - 134
[50] Physical Properties of Poly(lactic acid)/Hydroxyl Terminated Natural Rubber Blends
Srisuwan, Sawitri
Ruksakulpiwat, Yupaporn
Chumsamrong, Pranee
MACROMOLECULAR SYMPOSIA, 2015, 354 (01) : 118 - 124

← 1 2 3 4 5 →