Microstructures and Mechanical Properties of Mg-4.5Gd- 2.6Nd-0.5Zn-0.5Zr New Casting Alloy

被引：0

作者：

Zhan, Liang ^{[1
,2
]}

Le, Qichi ^{[2
]}

Feng, Zhijun ^{[1
]}

Lou, Yanchun ^{[1
]}

Li, Huawen ^{[3
]}

机构：

[1] State Key Laboratory of Light Alloy Casting Technology for High-end Equipment, Shenyang Research Institute of Foundry Co. Ltd, Shenyang,110022, China

[2] Key Lab of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang,110819, China

[3] AECC Zhong Chuan Transmission Machinery Co. Ltd, Changsha,410200, China

来源：

Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering | 2020年 / 49卷 / 08期

关键词：

The microstructure and mechanical properties of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr; a novel magnesium cast alloy; were investigated. The microstructure of the as-cast experimental alloy is determined to be composed of near-equiaxed α-Mg; Mg12(Nd; Gd); and Mg3Gd phases. After optimizing the heat treatment parameters; the YS; UTS; and A values reach 205 MPa; 325; MPa; and 4.0% at room temperature; and; 145; 245; and 18.5% at 250 oC. The strengthening mechanism of this alloy was also investigated. The fracture surfaces of Mg-4.5Gd-2.6Nd-0.5Zn-0.5Zr during tensile tests demonstrate that brittle fracture occurs at room temperature; and ductile fracture occurs at 250 oC accompanied by appearance of many dimples and tear ridges. Copyright © 2020; Northwest Institute for Nonferrous Metal Research. Published by Science Press. All rights reserved;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

引用

页码：2644 / 2648

共 50 条

[21] Effects of 0.5 wt% Ce addition on microstructures and mechanical properties of a wrought Mg−8Gd−1.2Zn−0.5Zr alloy
Li, Baishun
Guan, Kai
Yang, Qiang
Niu, Xiaodong
Zhang, Dongdong
Yu, Zijian
Zhang, Xuhu
Tang, Zongmin
Meng, Jian
Journal of Alloys and Compounds, 2020, 763 : 120 - 133
[22] Effect of Nd on the microstructure and mechanical properties of Mg–3Zn-0.5Zr alloy
Zhang, J.H.
Nie, K.B.
Deng, K.K.
Han, X.Z.
Wang, Z.D.
Materials Science and Engineering: A, 2022, 838
[23] Effect of Nd on the microstructure and mechanical properties of Mg-3Zn-0.5Zr alloy
Zhang, J. H.
Nie, K. B.
Deng, K. K.
Han, X. Z.
Wang, Z. D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 838
[24] Effect of Nd on the microstructure and mechanical properties of Mg-8Gd-5Y-2Zn-0.5Zr alloy
Zhang, Xingguo
Meng, Linggang
Fang, Canfeng
Peng, Peng
Ja, Fei
Hao, Hai
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 586 : 19 - 24
[25] Effect of Heat Treatment on Microstructures and Mechanical Properties of Mg–5.5Gd–3.5Nd–0.5Zn–0.4Zr Alloy
Zhengqiu Li
Deming Zhang
Zhihao Zhao
Chunyang Xia
Yijun Zhu
Ziqi Liu
Transactions of the Indian Institute of Metals, 2022, 75 : 2883 - 2890
[26] Microstructures evolution, texture characteristics and mechanical properties of extruded Mg-9Gd-3Nd-1Zn-1Sn-0.5Zr alloy
Liu, Xinna
Yan, Zehua
Zhang, Wei
MATERIALS RESEARCH EXPRESS, 2024, 11 (07)
[27] 铸造镁合金Mg-2.6Nd-1.5Gd-0.5Zn-0.5Zr组织和性能研究
占亮
乐启炽
冯志军
岳野
马英勃
铸造, 2020, 69 (12) : 1298 - 1303
[28] High temperature mechanical behavior of an extruded Mg-11Gd-4.5Y-1Nd-1.5Zn-0.5Zr (wt%) alloy
Yu, Zijian
Huang, Yuanding
Dieringa, Hajo
Mendis, Chamini Lakshi
Guan, Renguo
Hort, Norbert
Meng, Jian
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 645 : 213 - 224
[29] Effects of samarium content on microstructure and mechanical properties of Mg-0.5Zn-0.5Zr alloy
Guan, Kai
Meng, Fanzhi
Qin, Pengfei
Yang, Qiang
Zhang, Dongdong
Li, Baishun
Sun, Wei
Lv, Shuhui
Huang, Yuanding
Hort, Norbert
Meng, Jian
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (07) : 1368 - 1377
[30] Microstructure evolution and mechanical properties of Mg-7Gd-3Y-1Nd-1Zn-0.5Zr alloy
Li, Meng
Zhang, Kui
Du, Zhi-wei
Li, Xing-gang
Ma, Ming-long
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (07) : 1835 - 1842

← 1 2 3 4 5 →