A more accurate constraint parameter to characterize the creep constraint effect at crack tip of Cr-Mo-V steel

被引：0
|
作者：
Luo Y. [1 ]
Zhang Q. [2 ]
Jiang W.C. [1 ]
机构：
[1] College of Chemical Engineering, China University of Petroleum (East China), Qingdao
[2] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao
来源：
Key Engineering Materials | 2019年 / 795卷
基金：
中国国家自然科学基金;
关键词：
Constraint parameter; Cr-Mo-V steel; Creep constraint effect; Creep crack growth;
D O I：
10.4028/www.scientific.net/KEM.795.79
中图分类号：
学科分类号：
摘要：
A suitable constraint parameter is a key to quantify the creep crack tip constraint levels. In this study, a new more accurate creep constraint parameter As of Cr-Mo-V steel was proposed based on the existing constraint parameters R* and Ac. The CCG rate equation of Cr-Mo-V steel related to the constraint parameter As is obtained. The results show that the constraint parameter As is basically unchanged with the increase of creep time. The crack growth data predicted by the constraint dependent CCG rate equation are in good agreement with the experimental data. The established constraint dependent CCG rate equation can predict the CCG rate at other constraint levels very well. © 2019 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：79 / 85
页数：6
相关论文
共 50 条
  • [31] Electromagnetic acoustic resonance to assess creep damage in Cr-Mo-V steel
    Ohtani, Toshihiro
    Ogi, Hirotsugu
    Hirao, Masahiko
    Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers, 2006, 45 (5 B): : 4526 - 4533
  • [32] NONLINEAR ACOUSTICS AND MICROSTRUCTURAL EVOLUTION DURING CREEP IN Cr-Mo-V STEEL
    Ohtani, T.
    Ogawa, T.
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 29A AND 29B, 2010, 1211 : 1418 - 1424
  • [33] WEIBULL DISTRIBUTION OF THE CAVITY LENGTH DURING CREEP IN A CR-MO-V STEEL
    SUMIDA, T
    IKUNO, T
    SUKEKAWA, M
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1994, 13 (22) : 1625 - 1628
  • [34] Creep fracture mechanism map and creep damage of Cr-Mo-V turbine rotor steel
    Shinya, Norio
    Kyono, Junro
    Kushima, Hideaki
    ISIJ INTERNATIONAL, 2006, 46 (10) : 1516 - 1522
  • [35] The influence of stress-regime dependent creep model and ductility in the prediction of creep crack growth rate in Cr-Mo-V steel
    Zhang, J. W.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    MATERIALS & DESIGN, 2015, 65 : 644 - 651
  • [36] Effect of slow thermal fatigue on creep property of Cr-Mo-V ferrite heat resistance steel
    Liu, B.
    Wang, D.P.
    Liao, Z.
    2001, Science Press (22):
  • [37] Effects of Residual Stress on Creep Crack Initiation and Growth of Cr-Mo-V steel in Cracked C(T) Specimen
    Song, X. M.
    Wang, G. Z.
    Tu, S. -T.
    Xuan, F. Z.
    PRESSURE VESSEL TECHNOLOGY: PREPARING FOR THE FUTURE, 2015, 130 : 1770 - 1778
  • [38] Prediction of creep crack growth behavior in Cr-Mo-V steel specimens with different constraints for a wide range of C
    Zhang, J. W.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    ENGINEERING FRACTURE MECHANICS, 2014, 132 : 70 - 84
  • [39] Creep-Induced Microstructural Changes and Acoustic Characterization in a Cr-Mo-V Steel
    Ohtani, Toshihiro
    Yin, Fuxing
    Kamada, Yasuhiro
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2008, 47 (05) : 3916 - 3921
  • [40] ASSESSMENT OF CREEP DAMAGE BY DENSITY CHANGE MEASUREMENTS FOR Cr-Mo-V STEEL.
    Shinya, Norio
    Kyono, Junro
    Yokoi, Shin
    Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1984, 70 (06): : 573 - 579
12345