A more accurate constraint parameter to characterize the creep constraint effect at crack tip of Cr-Mo-V steel

被引：0
|
作者：
Luo Y. [1 ]
Zhang Q. [2 ]
Jiang W.C. [1 ]
机构：
[1] College of Chemical Engineering, China University of Petroleum (East China), Qingdao
[2] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao
来源：
Key Engineering Materials | 2019年 / 795卷
基金：
中国国家自然科学基金;
关键词：
Constraint parameter; Cr-Mo-V steel; Creep constraint effect; Creep crack growth;
D O I：
10.4028/www.scientific.net/KEM.795.79
中图分类号：
学科分类号：
摘要：
A suitable constraint parameter is a key to quantify the creep crack tip constraint levels. In this study, a new more accurate creep constraint parameter As of Cr-Mo-V steel was proposed based on the existing constraint parameters R* and Ac. The CCG rate equation of Cr-Mo-V steel related to the constraint parameter As is obtained. The results show that the constraint parameter As is basically unchanged with the increase of creep time. The crack growth data predicted by the constraint dependent CCG rate equation are in good agreement with the experimental data. The established constraint dependent CCG rate equation can predict the CCG rate at other constraint levels very well. © 2019 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：79 / 85
页数：6
相关论文
共 50 条
  • [21] HIGH-TEMPERATURE CREEP DEFORMATION OF A CR-MO-V STEEL
    KIMURA, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S487 - S487
  • [22] Study of the guarantee of reliability for estimating creep damage by `A' parameter method in Cr-Mo-V steel forgings
    Ikuno, Takeshi
    Fukushima, Kazuo
    Sumida, Takeo
    Yoshikawa, Kunihiko
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1997, 63 (610): : 1213 - 1218
  • [23] CREEP DEFORMATION AND CREEP-RUPTURE BEHAVIOR OF CR-MO-V STEEL FORGINGS
    KADOYA, Y
    GOTO, T
    ISIJ INTERNATIONAL, 1990, 30 (10) : 829 - 837
  • [24] Quantifying the creep crack-tip constraint effects using a load-independent constraint parameter Q
    Xu, Lianyong
    Zhang, Xingfu
    Zhao, Lei
    Han, Yongdian
    Jing, Hongyang
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 119 : 320 - 332
  • [25] Creep fracture mechanism map and creep damage of Cr-Mo-V rotor steel
    Shinya, Norio
    Kyono, Junro
    Kushima, Hideaki
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2006, 92 (05): : 33 - 39
  • [26] CREEP DEFORMATION AND CREEP-RUPTURE BEHAVIOR OF CR-MO-V STEEL FORGINGS
    KADOYA, Y
    GOTO, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1990, 76 (07): : 1171 - 1178
  • [27] Investigation on creep crack initiation prediction considering constraint effect using constraint parameter Q
    Wu, Dongquan
    Jing, Hongyang
    Xu, Lianyong
    Zhao, Lei
    Han, Yongdian
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 96 : 631 - 641
  • [28] The proposal of Q* parameter and derivation of the law of creep crack growth life for a round bar specimen with a circular notch for Cr-Mo-V steel
    Adachi, T
    Yokobori, AT
    Tabuchi, M
    Fuji, A
    Yokobori, T
    Nikbin, K
    MATERIALS AT HIGH TEMPERATURES, 2004, 21 (02) : 95 - 100
  • [29] Effects of residual stress on creep damage and crack initiation in notched CT specimens of a Cr-Mo-V steel
    Chen, L. Y.
    Wang, G. Z.
    Tan, J. P.
    Xuan, F. Z.
    Tu, S. T.
    ENGINEERING FRACTURE MECHANICS, 2013, 97 : 80 - 91
  • [30] Electromagnetic acoustic resonance to assess creep damage in Cr-Mo-V steel
    Ohtani, Toshihiro
    Ogi, Hirotsugu
    Hirao, Masahiko
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2006, 45 (5B): : 4526 - 4533
12345