A more accurate constraint parameter to characterize the creep constraint effect at crack tip of Cr-Mo-V steel

被引：0
|
作者：
Luo Y. [1 ]
Zhang Q. [2 ]
Jiang W.C. [1 ]
机构：
[1] College of Chemical Engineering, China University of Petroleum (East China), Qingdao
[2] College of Mechanical and Electronic Engineering, China University of Petroleum (East China), Qingdao
来源：
Key Engineering Materials | 2019年 / 795卷
基金：
中国国家自然科学基金;
关键词：
Constraint parameter; Cr-Mo-V steel; Creep constraint effect; Creep crack growth;
D O I：
10.4028/www.scientific.net/KEM.795.79
中图分类号：
学科分类号：
摘要：
A suitable constraint parameter is a key to quantify the creep crack tip constraint levels. In this study, a new more accurate creep constraint parameter As of Cr-Mo-V steel was proposed based on the existing constraint parameters R* and Ac. The CCG rate equation of Cr-Mo-V steel related to the constraint parameter As is obtained. The results show that the constraint parameter As is basically unchanged with the increase of creep time. The crack growth data predicted by the constraint dependent CCG rate equation are in good agreement with the experimental data. The established constraint dependent CCG rate equation can predict the CCG rate at other constraint levels very well. © 2019 Trans Tech Publications Ltd, Switzerland.
引用
收藏
页码：79 / 85
页数：6
相关论文
共 50 条
  • [1] Effect of constraint on creep fracture toughness of a Cr-Mo-V steel
    Zhang, Kun
    Tan, Jianping
    Chang, Shuai
    Zhu, Wenbo
    Tu, Shantung
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 131
  • [2] Effect and mechanism of out-of-plane constraint on creep crack growth behavior of a Cr-Mo-V steel
    Tan, J. P.
    Tu, S. T.
    Wang, G. Z.
    Xuan, F. Z.
    ENGINEERING FRACTURE MECHANICS, 2013, 99 : 324 - 334
  • [3] EFFECT OF THE OUT-OF-PLANE CONSTRAINT ON CREEP CRACK GROWTH PROPERTY OF CR-MO-V TYPE STEEL
    Tan, Jian-Ping
    Wang, Guo-Zhen
    Xuan, Fu-Zhen
    Tu, Shan-Tung
    Wang, Zheng-Dong
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE (PVP-2011), VOL 5, 2012, : 237 - 246
  • [4] Creep damage and creep crack growth behavior in Cr-Mo-V steel
    Yokobori, Toshimitsu, 1600, (57):
  • [5] Characterization of creep constraint effect for brazed joint specimens at crack tip by new constraint parameter As
    Jiang, Wenchun
    Luo, Yun
    Zhang, Baozhu
    Li, S-H
    Xie, X-F
    Tu, Shan-Tung
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
  • [6] In-plane and out-of-plane constraint effects on creep crack growth rate in Cr-Mo-V steel for wide range of C*
    Zhang, J. W.
    Wang, G. Z.
    Xuan, F. Z.
    Tu, S. T.
    MATERIALS AT HIGH TEMPERATURES, 2015, 32 (05) : 512 - 523
  • [7] Measurement of residual stresses in high constraint and thick Cr-Mo-V welded steel
    Misura delle tensioni residue in saldature di acciaio al Cr-Mo-V di elevato spessore e vincolo
    1600, Instituto Italiano della Saldatura (66):
  • [8] EFFECT OF CREEP DAMAGE ON FATIGUE LIFE OF CR-MO-V STEEL
    SHINYA, N
    KYONO, J
    KUSHIMA, H
    YOKOI, S
    TRANSACTIONS OF NATIONAL RESEARCH INSTITUTE FOR METALS, 1987, 29 (02): : 115 - 123
  • [9] Creep crack growth in a Cr-Mo-V type steel: experimental observation and prediction
    Shan-Tung TU
    Acta Metallurgica Sinica(English Letters), 2011, 24 (02) : 81 - 91
  • [10] Prediction of creep crack initiation in Cr-Mo-V steel specimens with different geometries
    He, J. Z.
    Wang, G. Z.
    Tu, S. T.
    Xuan, F. Z.
    MATERIALS AT HIGH TEMPERATURES, 2017, 34 (01) : 87 - 96
12345