Structural performance of large-scale 3D-printed walls subjected to axial compression load

被引:0
|
作者
Silveira, Marcos V. G. [1 ]
Wagner, Juliana S. [1 ]
Khanverdi, Mohsen [1 ]
Das, Sreekanta [1 ]
机构
[1] Univ Windsor, Dept Civil & Environm Engn, Windsor, ON N9B 3P4, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
additive manufacturing (AM); large-scale testing; 3D-printed masonry walls; digital image correlation (DIC); axial compressive load;
D O I
10.1139/cjce-2023-0395919
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Despite the growing incorporation of additive manufacturing in the construction industry, a significant gap persists in the availability of design guidelines and comprehensive structural assessments for 3D-printed components. This research employs experimental methods to evaluate the performance of large-scale hollow unreinforced 3D-printed masonry walls under axial compressive load. Furthermore, a design methodology tailored for 3D-printed masonry walls under compressive loads is proposed in compliance with both American and Canadian masonry standards. This methodology is supported by the application of linear elastic 3D finite element analysis. Moreover, supplementary insights into material behavior are garnered through the examination of small specimens extracted from an additional 3D-printed wall. The results reveal that 3D printing reduces stiffness and compressive strength. The 3D-printed infills played an important role in redistributing stress after cracking. All full-scale 3D-printed masonry walls examined in this research exceeded the performance criteria set by the American masonry standard for load-bearing walls.
引用
收藏
页码:919 / 933
页数:15
相关论文
共 50 条
  • [31] Experimental study and design approach on 3D printed concrete walls under eccentric axial compression
    Wang, Jingsong
    Zhang, Peng
    Feng, Jian
    Cai, Jianguo
    [J]. CASE STUDIES IN CONSTRUCTION MATERIALS, 2024, 20
  • [32] Structural performance of 3D-printed composites under various loads and environmental conditions
    Khosravani, Mohammad Reza
    Zolfagharian, Ali
    Jennings, Matt
    Reinicke, Tamara
    [J]. POLYMER TESTING, 2020, 91
  • [33] Structural testing of large-scale posttensioned concrete masonry walls
    Laursen, PT
    Ingham, JM
    [J]. JOURNAL OF STRUCTURAL ENGINEERING, 2004, 130 (10) : 1497 - 1505
  • [34] Scale Effect Assessment of Innovative 3D-Printed Honeycomb under Quasi-Static Compression
    Menegozzo, Marco
    Cecchini, Andres
    Ogle, Ryan Christian
    Vaidya, Uday Kumar
    Acevedo-Figueroa, Isaac
    Torres-Hernandez, Jaine A.
    [J]. AEROSPACE, 2023, 10 (03)
  • [36] Performance of 3D-printed fuel cells and stacks
    Gould, Benjamin D.
    Rodgers, Joseph A.
    Schuette, Michael
    Bethune, Keith
    Louis, Shaquille
    Rocheleau, Richard
    Swider-Lyons, Karen
    [J]. POLYMER ELECTROLYTE FUEL CELLS 14, 2014, 64 (03): : 935 - 944
  • [37] 3D-printed concrete: applications, performance, and challenges
    Siddika, Ayesha
    Al Mamun, Md Abdullah
    Ferdous, Wahid
    Saha, Ashish Kumer
    Alyousef, Rayed
    [J]. JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS, 2020, 9 (03) : 127 - 164
  • [38] Tensile performance of 3D-printed helical springs
    Bai, Jiang-Bo
    Li, Shao-Lin
    Fantuzzi, Nicholas
    Liu, Tian-Wei
    [J]. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (30) : 13097 - 13109
  • [39] Experimental study on axial compressive performance of 3D printed concrete walls with core columns
    Cai, Jianguo
    Wang, Jingsong
    Du, Caixia
    Fan, Xiao
    Zhang, Qian
    Feng, Jian
    [J]. Jianzhu Jiegou Xuebao/Journal of Building Structures, 2024, 45 (07): : 31 - 42
  • [40] 3D-Printed Optics for Wafer-Scale Probing
    Trappen, Mareike
    Blaicher, Matthias
    Dietrich, Philipp-Immanuel
    Hoose, Tobias
    Xu, Yilin
    Billah, Muhammad Rodlin
    Freude, Wolfgang
    Koos, Christian
    [J]. 2018 EUROPEAN CONFERENCE ON OPTICAL COMMUNICATION (ECOC), 2018,