Structural performance of large-scale 3D-printed walls subjected to axial compression load

被引:0
|
作者
Silveira, Marcos V. G. [1 ]
Wagner, Juliana S. [1 ]
Khanverdi, Mohsen [1 ]
Das, Sreekanta [1 ]
机构
[1] Univ Windsor, Dept Civil & Environm Engn, Windsor, ON N9B 3P4, Canada
基金
加拿大自然科学与工程研究理事会;
关键词
additive manufacturing (AM); large-scale testing; 3D-printed masonry walls; digital image correlation (DIC); axial compressive load;
D O I
10.1139/cjce-2023-0395919
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Despite the growing incorporation of additive manufacturing in the construction industry, a significant gap persists in the availability of design guidelines and comprehensive structural assessments for 3D-printed components. This research employs experimental methods to evaluate the performance of large-scale hollow unreinforced 3D-printed masonry walls under axial compressive load. Furthermore, a design methodology tailored for 3D-printed masonry walls under compressive loads is proposed in compliance with both American and Canadian masonry standards. This methodology is supported by the application of linear elastic 3D finite element analysis. Moreover, supplementary insights into material behavior are garnered through the examination of small specimens extracted from an additional 3D-printed wall. The results reveal that 3D printing reduces stiffness and compressive strength. The 3D-printed infills played an important role in redistributing stress after cracking. All full-scale 3D-printed masonry walls examined in this research exceeded the performance criteria set by the American masonry standard for load-bearing walls.
引用
收藏
页码:919 / 933
页数:15
相关论文
共 50 条
  • [21] Fire performance evaluation of 3D-Printed concrete walls: A combined full-scale and numerical modeling approach
    Suphunsaeng, Kantawich
    Prasittisopin, Lapyote
    Pethrung, Sirichai
    Pansuk, Withit
    JOURNAL OF BUILDING ENGINEERING, 2025, 104
  • [22] Computational Optimization of 3D-Printed Concrete Walls for Improved Building Thermal Performance
    AlZahrani, Abdullah A.
    Alghamdi, Abdulrahman A.
    Basalah, Ahmad A.
    BUILDINGS, 2022, 12 (12)
  • [23] Design of 3D-Printed Hybrid Axial-Flux Motor Using 3D-Printed SMC Core
    Pyo, Hyun-Jo
    Jeong, Jae Won
    Yu, Jihun
    Lee, Sung Gu
    Kim, Won-Ho
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2020, 30 (04)
  • [24] 3D-Printed Biomimetic Structural Colors
    Bi, Ran
    Li, Xiaohong
    Ou, Xingcheng
    Huang, Jiaqi
    Huang, Dantong
    Chen, Guoliang
    Sheng, Yu
    Hong, Wei
    Wang, Yan
    Hu, Weijie
    Guo, Shuang-Zhuang
    SMALL, 2024, 20 (05)
  • [25] Seismic and Energy Performance Evaluation of Large-Scale Curtain Walls Subjected to Displacement Control Fasteners
    Lee, Heonseok
    Oh, Myunghwan
    Seo, Junwon
    Kim, Woosuk
    APPLIED SCIENCES-BASEL, 2021, 11 (15):
  • [26] Development of Variable Residential Buildings with 3D-Printed Walls
    Garcia-Alvarado, Rodrigo
    Moroni-Orellana, Ginnia
    Banda, Pablo
    BUILDINGS, 2022, 12 (11)
  • [27] Experimental studies on snaking in 3D-printed cylindrical shells under axial compression using photogrammetry
    Ravulapalli, V.
    Raju, G.
    Narayanamurthy, V.
    PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2024, 480 (2282):
  • [28] A novel 3D-printed multi-driven system for large-scale neurophysiological recordings in multiple brain regions
    Sheng, Tao
    Xing, Danqin
    Wu, Yi
    Wang, Qiao
    Li, Xiangyao
    Lu, Wei
    JOURNAL OF NEUROSCIENCE METHODS, 2021, 361
  • [29] A modular, 3D-printed helium-filled soap bubble generator for large-scale volumetric flow measurements
    Gibeau, Bradley
    Ghaemi, Sina
    EXPERIMENTS IN FLUIDS, 2018, 59 (12)
  • [30] Dynamic behaviors of sandwich panels with 3D-printed gradient auxetic cores subjected to blast load
    Chen, Chuanqing
    He, Yulong
    Xu, Rui
    Gao, Cheng
    Li, Xin
    Lu, Minghui
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2024, 188