Microstructural characterisation and compound formation in rapidly solidified SiGe alloy

被引:0
|
作者
Al-Jenabi, Osama [1 ,2 ]
Aslam, Zabeada [3 ]
Cochrane, Robert F. [2 ]
Mullis, Andrew M. [2 ]
机构
[1] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, England
[2] Univ Leeds, Sch Chem & Proc Engn, Leeds LS2 9JT, England
[3] Univ Leeds, Bragg Ctr Mat Res, Leeds LS2 9JT, England
关键词
Thermoelectric alloy; Nonequilibrium solidification; Rapid quenching; Chemical ordering; Group IV semiconductors; COOLING RATE; GE; GERMANIUM; GROWTH; EMISSIVITY; EVOLUTION;
D O I
10.1016/j.jallcom.2024.174560
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Severe Ge segregation to grain boundaries was observed in a Si-14.2 at% Ge thermoelectric alloy rapidly solidified using a drop-tube facility, manifesting itself as a series of regions with uniform stoichiometric compositions. The step change in composition at the interface between adjacent regions was ascribed to the formation of different SiGe pseudocompounds and contradicted the accepted thermodynamic description of the SiGe system as a continuous random solid solution. Rapid solidification increased, rather than decreased, the inhomogeneity degree of the solid product, and the Ge content of the most Ge-rich regions was positively correlated with the cooling rate, which suggested the absence of solute trapping. The transmission electron microscopy/selected area electron diffraction analysis of the most Ge-rich regions revealed superlattice spots indicative of chemical ordering. However, simple chemical ordering within a single diamond cubic unit cell could not explain the fact that most stoichiometries had compositions that were multiples of 5 at% Ge, which indicated the presence of superstructural ordering.
引用
收藏
页数:13
相关论文
共 50 条
  • [41] Microstructural investigation of a rapidly solidified Ti-Zr-Fe-Si-Sn-Nb alloy
    Liu, Z. G.
    Wang, X.
    Wang, X. P.
    Zhang, C. J.
    Chai, L. H.
    Chen, Y. Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S480 - S482
  • [42] Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy
    Fan, Z
    Miodownik, AP
    ACTA MATERIALIA, 1996, 44 (01) : 93 - 110
  • [43] MICROSTRUCTURAL FEATURES OF RAPIDLY SOLIDIFIED 7075 ALLOY CONTAINING 1.0 WT-PERCENT-MN
    VENKATESWARARAO, V
    SCRIPTA METALLURGICA ET MATERIALIA, 1992, 26 (05): : 819 - 823
  • [44] AN INVESTIGATION ON THE MICROSTRUCTURAL STABILITY OF RAPIDLY SOLIDIFIED AL-FE-V-SI ALLOY RIBBON
    WANG, JQ
    TSENG, MK
    CHEN, XF
    ZHANG, BJ
    ZE, XY
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 (pt 1): : 412 - 415
  • [45] Microstructural evolution in rapidly solidified Ti-7.5 Mn-0.5 B alloy
    Univ of Oxford, Oxford, United Kingdom
    Acta Mater, 1 (93-110):
  • [46] ω-Phase formation in a rapidly solidified Cr-40 at.% Al alloy
    Shao, G
    Nguyen-Manh, D
    Pettifor, DG
    Tsakiropoulos, P
    PHILOSOPHICAL MAGAZINE LETTERS, 2000, 80 (11) : 703 - 710
  • [47] METASTABLE PHASE FORMATION AND DECOMPOSITION IN A RAPIDLY SOLIDIFIED ALUMINUM-PLATINUM ALLOY
    CHATTOPADHYAY, K
    RAMACHANDRARAO, P
    MATERIALS SCIENCE AND ENGINEERING, 1979, 38 (01): : 7 - 17
  • [48] MICROSTRUCTURAL CHARACTERISTICS AND GAS CONTENT OF RAPIDLY SOLIDIFIED POWDERS
    DUNNING, JS
    DOAN, RC
    JOURNAL OF MATERIALS SCIENCE, 1994, 29 (16) : 4268 - 4272
  • [49] MICROSTRUCTURAL DECOMPOSITION OF RAPIDLY SOLIDIFIED ALLOYS DURING CONSOLIDATION
    MILLER, DJ
    ZINDEL, JW
    FRASER, HL
    JOURNAL OF METALS, 1985, 37 (11): : A56 - A56
  • [50] Microstructural characterization of granular CuCo rapidly solidified ribbons
    Vinai, F
    Tiberto, P
    Deriu, A
    Malizia, F
    Vittori-Antisari, M
    Angiolini, M
    Pedersen, JS
    MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 1, 1998, 269-2 : 339 - 344