Microstructural characterisation and compound formation in rapidly solidified SiGe alloy

被引:0
|
作者
Al-Jenabi, Osama [1 ,2 ]
Aslam, Zabeada [3 ]
Cochrane, Robert F. [2 ]
Mullis, Andrew M. [2 ]
机构
[1] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, England
[2] Univ Leeds, Sch Chem & Proc Engn, Leeds LS2 9JT, England
[3] Univ Leeds, Bragg Ctr Mat Res, Leeds LS2 9JT, England
关键词
Thermoelectric alloy; Nonequilibrium solidification; Rapid quenching; Chemical ordering; Group IV semiconductors; COOLING RATE; GE; GERMANIUM; GROWTH; EMISSIVITY; EVOLUTION;
D O I
10.1016/j.jallcom.2024.174560
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Severe Ge segregation to grain boundaries was observed in a Si-14.2 at% Ge thermoelectric alloy rapidly solidified using a drop-tube facility, manifesting itself as a series of regions with uniform stoichiometric compositions. The step change in composition at the interface between adjacent regions was ascribed to the formation of different SiGe pseudocompounds and contradicted the accepted thermodynamic description of the SiGe system as a continuous random solid solution. Rapid solidification increased, rather than decreased, the inhomogeneity degree of the solid product, and the Ge content of the most Ge-rich regions was positively correlated with the cooling rate, which suggested the absence of solute trapping. The transmission electron microscopy/selected area electron diffraction analysis of the most Ge-rich regions revealed superlattice spots indicative of chemical ordering. However, simple chemical ordering within a single diamond cubic unit cell could not explain the fact that most stoichiometries had compositions that were multiples of 5 at% Ge, which indicated the presence of superstructural ordering.
引用
收藏
页数:13
相关论文
共 50 条
  • [31] Microstructural characteristics and stability in a rapidly solidified Al-Fe-Nb-Si alloy
    Guan, SK
    Shen, NF
    Gong, YL
    Hu, HQ
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 1997, 13 (06) : 515 - 517
  • [32] Effect of cooling rate on the microstructure of rapidly solidified SiGe
    Hussain, Naveed
    Mullis, Andrew M.
    Haque, Nafisul
    MATERIALS CHARACTERIZATION, 2019, 154 : 377 - 385
  • [33] MICROSTRUCTURAL DEVELOPMENTS IN RAPIDLY SOLIDIFIED MONOTECTIC ALLOYS
    GOSWAMI, R
    CHATTOPADHYAY, K
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 (pt 1): : 163 - 167
  • [34] Formation of the microstructure of rapidly solidified hypoeutectic Al-Si alloy
    Olga Gusakova
    Vasiliy Shepelevich
    Dmitri V. Alexandrov
    Ilya O. Starodumov
    The European Physical Journal Special Topics, 2020, 229 : 417 - 425
  • [35] Formation of the microstructure of rapidly solidified hypoeutectic Al-Si alloy
    Gusakova, Olga
    Shepelevich, Vasiliy
    Alexandrov, Dmitri V.
    Starodumov, Ilya O.
    EUROPEAN PHYSICAL JOURNAL-SPECIAL TOPICS, 2020, 229 (2-3): : 417 - 425
  • [36] Microstructural studies on rapidly solidified inconel 625
    Dey, G.K.
    Albert, S.
    Srivastava, D.
    Sundararaman, M.
    Mukhopadhyay, P.
    Materials Science and Engineering A, 1989, A119 (1-2) : 175 - 184
  • [37] MICROSTRUCTURAL DEVELOPMENT IN RAPIDLY SOLIDIFIED MAGNESIUM ALLOYS
    KIM, NJ
    CHANG, CF
    DAS, SK
    JOURNAL OF METALS, 1988, 40 (11): : 28 - 28
  • [38] The characterisation of microstructural changes in rapidly solidified Al-Fe alloys through measurement of their electrical resistance
    Bizjak, Milan
    Kosec, Ladislav
    Kneissl, Albert C.
    Kosec, Borut
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2008, 99 (01) : 101 - 108
  • [39] Rapidly solidified aluminum alloy powder
    Cho, SS
    Chun, BS
    Won, CW
    Lee, BS
    Kim, HK
    Ryu, M
    Antolovich, SD
    ADVANCED MATERIALS & PROCESSES, 1997, 151 (01): : 29 - 31
  • [40] Effects of microstructural evolution on superplastic deformation characteristics of a rapidly solidified Al-Li alloy
    Kwon, YN
    Koh, HJ
    Lee, S
    Kim, NJ
    Chang, YW
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (07): : 1649 - 1658