Anion Bulk Doping of Organic Single-Crystalline Thin Films for Performance Enhancement of Organic Field-Effect Transistors

Chemical doping is a powerful way to enhance the electrical performance of organic electronics. To avoid perturbing the ordered molecular packing of organic semiconducting hosts, molecular dopants are deposited on the surface of highly crystalline organic semiconductor thin films. However, such surface doping protocols not only limit charge-transfer efficiency but also cause dopant diffusion problems, which significantly reduce charge carrier mobility and device stability. Here, an innovative anion bulk doping strategy is reported that allows effective doping of organic single-crystalline films (OSCFs) without disrupting molecular ordering to improve the performance of organic field-effect transistors (OFETs). This method is mediated by anion dopants and can be pictured as an effective charge transfer of dopants with organic semiconductors in liquid phase. The direct introduction of dopant anions overcomes limitations of partial charge transfer while avoiding interference from dopant aggregation with crystallization. Using this method, the average carrier mobility of the OSCFs is boosted by approximate to 2.5 times. Significantly, low-voltage OFETs developed from anion-doped OSCFs exhibit a near-ideal subthreshold swing of 59.2 mV dec-1 and unparalleled mobility as high as 19.8 cm2 V-1 s-1 together with excellent stability. The concept of anion doping opens new avenues for improving the electrical performance of organic electronics. A bulk anion doping approach is developed for efficiently doping organic single-crystalline films (OSCFs). The electrical properties of the anion-doped OSCFs are increased by almost 2.5-fold over that of the undoped samples. Consequently, mobility of the low-voltage organic field-effect transistors(OFETs) based on the anion-doped OSCF reaches a very high value of 19.8 cm2 V-1 s-1. image