TRIP-assisted compressive ductility in Ti-rich Ti60Mo10V10Cr10Zr10 refractory medium-entropy alloy

被引：1
|
作者：
Lee, Seongi [1 ]
Choi, Gwanghyo [2 ]
Lee, Kwangmin [1 ]
机构：
[1] School of Materials Science & Engineering, Chonnam National University, Gwangju,61186, Korea, Republic of
[2] Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Daejeon,34141, Korea, Republic of
来源：
International Journal of Refractory Metals and Hard Materials | 2021年 / 100卷
基金：
新加坡国家研究基金会;
关键词：
Crystal structure - High-entropy alloys - Chromium alloys - Ductility - Economic and social effects - Strain hardening - Plasticity - Titanium alloys - Compression testing - Strain rate;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Compositional tuned non-equiatomic refractory high-entropy alloys are coveted materials as they achieve considerable plasticity through transformation-induced plasticity (TRIP) behavior. In this study, a novel Ti-rich Ti60Mo10V10Cr10Zr10 refractory medium-entropy alloy (RMEA) was designed using FactSage. The plastic deformation of the alloy produced using vacuum arc remelting was investigated through a room-temperature compression test at different strain rates. A high strain-hardening rate and an m-value of 0.031 were observed in the Ti-rich Ti60Mo10V10Cr10Zr10 RMEA. The dimple structures formed in BCC phases and TRIP-assisted deformation attribute to the strength and ductility trade-off in Ti-rich Ti60Mo10V10Cr10Zr10 RMEA. © 2021 Elsevier Ltd
引用
收藏
相关论文
共 50 条
  • [41] Achieving high strength and ductility in Ni10Cr6WFe9Ti high entropy alloy by regulating lattice distortion
    Yang, Xigang
    Zhou, Yun
    Yang, Zhong
    Zhou, Yinghui
    Yang, Xiao
    Li, Yuan
    MATERIALS LETTERS, 2023, 330
  • [42] ADVANCED DEEP HARDENABLE TITANIUM-ALLOYS - 334(TI-10MO-6CR-2.5AL), 227(TI-7MO-4CR-2.5AL) AND 253(TI-10MO-8V-2.5AL)
    FROES, FH
    MALONE, RF
    HALL, JA
    JOM-JOURNAL OF METALS, 1975, 27 (12): : A39 - A39
  • [43] Influence of Partial Substitution of Mo for Ti on Hydrogen Storage Property of V40Ti50Fe10 Alloy
    Cao Z.
    Ma X.
    Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 2019, 53 (09): : 137 - 144
  • [44] MICROSTRUCTURAL INSTABILITY IN THE ALLOY TI-25AL-10NB-3V-1MO
    WARD, CH
    WILLIAMS, JC
    THOMPSON, AW
    SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (04): : 617 - 622
  • [45] Abnormal internal friction in the in-situ Ti60Zr15V10Cu5Be10 metallic glass matrix composite
    Qiao, J. C.
    Sun, B. A.
    Gu, J.
    Song, M.
    Pelletier, J. M.
    Qiao, J. W.
    Yao, Y.
    Yang, Y.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 724 : 921 - 931
  • [46] Synergistic effects of WC nanoparticles and MC nanoprecipitates on the mechanical and tribological properties of Fe40Mn40Cr10Co10 medium-entropy alloy
    Wang, Jianying
    Yang, Hailin
    Liu, Zhilin
    Li, Ruidi
    Ruan, Jianming
    Ji, Shouxun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (04): : 3550 - 3564
  • [47] How 10 at% Al Addition in the Ti-V-Zr-Nb High-Entropy Alloy Changes Hydrogen Sorption Properties
    Montero, Jorge
    Ek, Gustav
    Laversenne, Laetitia
    Nassif, Vivian
    Sahlberg, Martin
    Zlotea, Claudia
    MOLECULES, 2021, 26 (09):
  • [48] The Microstructural Evolution and Mechanical Properties of Boron-Doped Ti35Zr30V10Nb25 Refractory High-Entropy Alloy
    Wang, Xinggang
    Sun, Meng
    Liu, Jiaxin
    Liu, Xueqing
    Jiang, Weibin
    Wang, Xianping
    Fang, Qianfeng
    CRYSTALS, 2024, 14 (12)
  • [49] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MULTICOMPONENT Ti 61 Cr 10 Al 7 V 22 ALLOY
    Velikodnyi, O. M.
    Kolodiy, I. V.
    Levenets, A. V.
    Krainiuk, Y. O.
    Tikhonovsky, M. A.
    Tortika, O. C.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2024, (02): : 70 - 75
  • [50] Determination of phase transformation point of new type Ti-5Al-3.3V-8Mo-10Nb-1.0Zr-0.5Cr alloy
    Liu, Shuangjin
    Cai, Fenfei
    Cui, Chunxiang
    Yao, Xun
    ADVANCED MATERIALS AND PROCESSES, PTS 1-3, 2011, 311-313 : 742 - 747
12345