MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MULTICOMPONENT Ti 61 Cr 10 Al 7 V 22 ALLOY

被引：0
|
作者：
Velikodnyi, O. M. [1 ]
Kolodiy, I. V. [1 ]
Levenets, A. V. [1 ]
Krainiuk, Y. O. [1 ]
Tikhonovsky, M. A. [1 ]
Tortika, O. C. [1 ]
机构：
[1] Natl Sci Ctr Kharkov Inst Phys & Technol, Kharkiv, Ukraine
来源：
PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY | 2024年 / 02期
关键词：
HIGH-ENTROPY ALLOYS; SOLID-SOLUTION PHASE; CRITERIA;
D O I：
10.46813/2024-150-070
中图分类号：
O57 [原子核物理学、高能物理学];
学科分类号：
070202 ;
摘要：
The empirical and semi-empirical models were used to analyze the phase-structural state of lightweight alloys of the Ti-Cr-Al-V system. The composition of lightweight alloy Ti 61 Cr 10 Al 7 V 22 (at.%) was selected for experimental study. Ingots of this alloy were obtained by argon-arc melting method, and they were subjected to homogenization, deformation by rolling and subsequent annealing at different temperatures. The influence of annealing temperature on the phase-structural state of the alloys, hardness, and mechanical properties during tensile tests at room temperature and 650 degrees C has been studied experimentally. In cast condition and after deforming and annealing at 700...900 degrees C the alloy has a single-phase state with bcc lattice. In the annealing state alloy has a high value of strength characteristics and the elongation to fracture.
引用
收藏
页码：70 / 75
页数：6
相关论文
共 50 条
  • [1] STRUCTURE AND MECHANICAL PROPERTIES OF Ti-Cr-Al-Nb AND Ti-Cr-Al-Nb-V MULTICOMPONENT ALLOYS
    Velikodnyi, O. M.
    Vasilenko, R. V.
    Kalchenko, O. S.
    Kolodyi, I. V.
    Krainiuk, Y. O.
    Levenets, A. V.
    Stoev, P. I.
    Tikhonovsky, M. A.
    Tolstolutska, G. D.
    PROBLEMS OF ATOMIC SCIENCE AND TECHNOLOGY, 2023, (05): : 59 - 67
  • [2] Study on microstructure and mechanical properties of Ti-22Al-20Nb-7Ta intermetallic alloy
    Mao, Yong
    Li, Shiqiong
    Zhang, Jianwei
    Peng, Jihua
    Zou, Dunxu
    Zhong, Zengyong
    Jinshu Xuebao/Acta Metallurgica Sinica, 2000, 36 (02): : 135 - 140
  • [3] MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF TI-15V-3CR-3SN-3AL ALLOY
    GUNJI, M
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S697 - S697
  • [4] Microstructure and mechanical properties of (Al,Cr)3Ti based alloy with different Al additions
    Wang, Shouren
    Guo, Peiquan
    Yang, Lying
    Zhao, Fang
    Wang, Yanjun
    MATERIALS & DESIGN, 2009, 30 (03) : 704 - 709
  • [5] Microstructure and Mechanical Properties of the Isothermally Forged Ti-22Al-25Nb (at%) Alloy
    Wang Wei
    Zeng Weidong
    Yang Jin
    Gang Yue
    Zhang Jianwei
    Liang Xiaobo
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (06) : 1605 - 1608
  • [6] Effect of deformed microstructure on mechanical properties of Ti-22Al-25Nb alloy
    程云君
    李世琼
    梁晓波
    张建伟
    Transactions of Nonferrous Metals Society of China, 2006, (S3) : 2058 - 2061
  • [7] Effect of deformed microstructure on mechanical properties of Ti-22Al-25Nb alloy
    Cheng Yun-jun
    Li Shi-qiong
    Liang Xiao-bo
    Zhang Jian-wei
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 : S2058 - S2061
  • [8] Effect of α composite layer on the microstructure and mechanical properties of Ti-10V-2Fe-3Al alloy
    Bai, Xinfang
    Zhao, Yongqing
    Zeng, Weidong
    Jia, Zhiqiang
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2015, 44 (01): : 12 - 17
  • [9] Effect of α Composite Layer on the Microstructure and Mechanical Properties of Ti-10V-2Fe-3Al Alloy
    Bai Xinfang
    Zhao Yongqing
    Zeng Weidong
    Jia Zhiqiang
    RARE METAL MATERIALS AND ENGINEERING, 2015, 44 (01) : 12 - 17
  • [10] Influence of aging processing on microstructure and mechanical properties of ti-10v-2fe-3al alloy
    Shang, Guoqiang
    Kou, Hongchao
    Fei, Yue
    Chang, Hui
    Zhu, Zhishou
    Wang, Xinnan
    Zhang, Fengshou
    Li, Jinshan
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2010, 39 (06): : 1061 - 1065
12345