Surface Modification of Polyimide Film by Dielectric Barrier Discharge at Atmospheric Pressure

被引：0
|
作者：
彭释 [1 ]
李灵均 [2 ]
李炜 [1 ]
王超梁 [2 ]
郭颖 [2 ,3 ]
石建军 [2 ,3 ]
张菁 [2 ,3 ]
机构：
[1] College of Textile,Donghua University
[2] Department of Applied Physics,Donghua University
[3] Member of Magnetic Confinement Fusion Research Center,Ministry of Education,Donghua
来源：
Plasma Science and Technology | 2016年 / 04期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this paper,polyimide(PI)films are modified using an atmospheric pressure plasma generated by a dielectric barrier discharge(DBD)in argon.Surface performance of PI film and its dependence on exposure time from 0 s to 300 s are investigated by dynamic water contact angle(WCA),field emission scanning electron microscopy(FESEM),and Fourier transform infrared spectroscopy in attenuated total multiple reflection mode(FTIR-ATR).The study demonstrates that dynamic WCA exhibits a minimum with 40 s plasma treatment,and evenly distributed nano-dots and shadow concaves appeared for 40 s and 12 s Ar plasma treatment individually.A short period of plasma modification can contribute to the scission of the imide ring and the introduction of C-O and C=O(-COOH)by detailed analysis of FTIR-ATR.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Surface Modification of Polyimide Film by Dielectric Barrier Discharge at Atmospheric Pressure
    Peng Shi
    Li Lingjun
    Li Wei
    Wang Chaoliang
    Guo Ying
    Shi Jianjun
    Zhang Jing
    [J]. PLASMA SCIENCE & TECHNOLOGY, 2016, 18 (04): : 337 - 341
  • [2] Surface Modification of Polyimide Film by Dielectric Barrier Discharge at Atmospheric Pressure
    彭释
    李灵均
    李炜
    王超梁
    郭颖
    石建军
    张菁
    [J]. Plasma Science and Technology, 2016, 18 (04) : 337 - 341
  • [3] Effect of dielectric barrier discharge on surface modification characteristics of polyimide film
    Park, W. J.
    Yoon, S. G.
    Jung, W. S.
    Yoon, D. H.
    [J]. SURFACE & COATINGS TECHNOLOGY, 2007, 201 (9-11): : 5017 - 5020
  • [4] Surface treatment for Cu metallization on polyimide film by atmospheric pressure dielectric barrier discharge plasma system
    Cho, Sang-Jin
    Shrestha, Shankar Prasad
    Boo, Jin-Hyo
    [J]. CURRENT APPLIED PHYSICS, 2011, 11 (05) : S135 - S139
  • [5] SURFACE MODIFICATION OF LDPE FILM BY NANOSECOND-PULSE DIELECTRIC BARRIER DISCHARGE AT ATMOSPHERIC PRESSURE
    Ma, Yunfei
    Zhang, Cheng
    Wang, Ruixue
    Shao, Tao
    [J]. 2015 42ND IEEE INTERNATIONAL CONFERENCE ON PLASMA SCIENCES (ICOPS), 2015,
  • [6] Surface treatment of polyimide using atmospheric pressure dielectric barrier discharge plasma
    Riyanto, Edy
    [J]. SCIENCEASIA, 2020, 46 (04): : 444 - 449
  • [7] Polypropylene surface modification model in atmospheric pressure dielectric barrier discharge
    Wang, Changquan
    He, Xiangning
    [J]. SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06): : 3377 - 3384
  • [8] Dielectric barrier discharge treatments at atmospheric pressure for wood surface modification
    Rehn, P
    Viöl, W
    [J]. HOLZ ALS ROH-UND WERKSTOFF, 2003, 61 (02): : 145 - 150
  • [9] Dielectric barrier discharge treatments at atmospheric pressure for wood surface modification
    P. Rehn
    W. Viöl
    [J]. Holz als Roh- und Werkstoff, 2003, 61 (2): : 145 - 150
  • [10] Surface modification of fluororubber using atmospheric pressure dielectric barrier discharge (DBD)
    Tong, Wei
    Lu, Canhui
    Cai, Yongkun
    Huang, Yigang
    [J]. PLASMA SCIENCE & TECHNOLOGY, 2007, 9 (03): : 296 - 300
12345