EFFECTS OF DEPOSITION PARAMETERS AND OXYGEN ADDITION ON PROPERTIES OF SPUTTERED INDIUM TIN OXIDE FILMS

被引：0
|
作者：
Munir, Badrul [1 ]
Wibowo, Rachmat Adhi [2 ]
Ho, Kim Kyoo [2 ]
机构：
[1] Univ Indonesia, Dept Met & Mat Engn, Depok 16424, Indonesia
[2] Yeungnam Univ, Sch Mat Sci & Engn, Gyongsan 712749, South Korea
来源：
MAKARA JOURNAL OF TECHNOLOGY | 2012年 / 16卷 / 02期
关键词：
characterization; indium semiconductor; sputtering; thin films; tin oxide;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Indium tin oxide (ITO) films were sputtered on corning glass substrate. Oxygen admixture and sputtering deposition parameters were optimized to obtain the highest transparency as well as lowest resistivity. Structural, electrical and optical properties of the films were then examined. Increasing deposition rate and film thickness changed the crystallographic orientation from (222) to (400) and (440), as well as higher surface roughness. It was necessary to apply substrate heating during reposition to get films with better crystallinity The lowest resistivity of 5.36 x 10(-4) Omega.cm was obtained at 750 nm film thickness. The films' resistivity was increased by addition of oxygen up to 2% in the argon sputtering gas. All films showed over 85% transmittance in the visible wavelength range, possible for applications in photovoltaic and display devices.
引用
收藏
页码：103 / 108
页数：6
相关论文
共 50 条
  • [21] A comparative study of the effect of annealing and plasma treatments on the microstructure and properties of colloidal indium tin oxide films and cold-sputtered indium tin oxide films
    Joshi, Salil M.
    Book, Gregory W.
    Gerhardt, Rosario A.
    THIN SOLID FILMS, 2012, 520 (07) : 2723 - 2730
  • [22] Effects of oxygen ion beam plasma conditions on the properties of Indium tin oxide thin films
    Bae, JW
    Kim, HJ
    Kim, JS
    Lee, NE
    Yeom, GY
    VACUUM, 2000, 56 (01) : 77 - 81
  • [23] Effects of oxygen gas annealing on electrical properties and internal stress in indium tin oxide films
    Takayama, S
    Tanaka, A
    Sugawara, T
    Himuro, T
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 2002, 41 (6A): : L619 - L621
  • [24] Annealing effects on opto-electronic properties of sputtered and thermally evaporated indium-tin-oxide films
    Morgan, DV
    Aliyu, YH
    Bunce, RW
    Salehi, A
    THIN SOLID FILMS, 1998, 312 (1-2) : 268 - 272
  • [25] EFFECTS OF DEPOSITION PARAMETERS ON PROPERTIES OF RF SPUTTERED MOLYBDENUM FILMS
    NOWICKI, RS
    BUCKLEY, WD
    MACKINTOSH, WD
    MITCHELL, IV
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY, 1974, 11 (04): : 675 - 679
  • [26] Deposition and annealing studies of indium tin oxide films
    Sundaram, KB
    Blanchard, J
    IEEE SOUTHEASTCON '97 - ENGINEERING THE NEW CENTURY, PROCEEDINGS, 1996, : 230 - 232
  • [27] Optimization of Sputtering Parameters for the Deposition of Low Resistivity Indium Tin Oxide Thin Films
    Yasrebi, Navid
    Bagheri, Behrang
    Yazdanfar, Payam
    Rashidian, Bizhan
    Sasanpour, Pezhman
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2014, 27 (02) : 324 - 330
  • [28] Optimization of Sputtering Parameters for the Deposition of Low Resistivity Indium Tin Oxide Thin Films
    Navid Yasrebi
    Behrang Bagheri
    Payam Yazdanfar
    Bizhan Rashidian
    Pezhman Sasanpour
    ActaMetallurgicaSinica(EnglishLetters), 2014, 27 (02) : 324 - 330
  • [29] Optimization of Sputtering Parameters for the Deposition of Low Resistivity Indium Tin Oxide Thin Films
    Navid Yasrebi
    Behrang Bagheri
    Payam Yazdanfar
    Bizhan Rashidian
    Pezhman Sasanpour
    Acta Metallurgica Sinica (English Letters), 2014, 27 : 324 - 330
  • [30] MICROSTRUCTURE AND ETCHING PROPERTIES OF SPUTTERED INDIUM TIN OXIDE (ITO)
    HOHEISEL, M
    MITWALSKY, A
    MROTZEK, C
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1991, 123 (02): : 461 - 472
12345