Drying of Ceramic Hollow Bricks in an Industrial Tunnel Dryer: A Finite Volume Analysis

被引：0
|
作者：
de Souza Tavares, Francisca Valdeiza [1 ]
de Farias Neto, Severino Rodrigues [2 ]
Barbosa, Enivaldo Santos [1 ]
Barbosa de Lima, Antonio Gilson [1 ]
Joaquina E Silva, Carlota [1 ]
机构：
[1] Fed Univ Campina Grande UFCG, Dept Mech Engn, BR-58429900 Campina Grande, PB, Brazil
[2] Fed Univ Campina Grande UFCG, Dept Chem Engn, BR-58429900 Campina Grande, PB, Brazil
来源：
INTERNATIONAL JOURNAL OF MULTIPHYSICS | 2014年 / 8卷 / 03期
关键词：
Simulation; MASS; Heat; Brick; Drying;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper aims to study the drying of industrial hollow bricks in a tunnel dryer cross flow type. The theoretical model Is based on mass and energy conservation equations applied to air and product. To validate the methodology, numerical and experimental results for the moisture content and the temperature of brick during the drying in an industrial scale are compared and a good correlation was obtained. Results of moisture content and temperature of the product, and temperature, relative humidity and absolute humidity of drying air as a function of drying time and position in the dryer are presented and analyzed.
引用
收藏
页码：297 / 311
页数：15
相关论文
共 32 条
  • [1] Analysis and Optimization of Drying of Green Bricks in a Tunnel Dryer
    Mancuhan, Ebru
    DRYING TECHNOLOGY, 2009, 27 (05) : 707 - 713
  • [2] Heat and mass transport in an industrial tunnel dryer: Modeling and simulation applied to hollow bricks
    Almeida, Genival da Silva
    da Silva, Joselito Barbosa
    Joaquina e Silva, Carlota
    Swarnakar, Ramdayal
    Neves, Gelmires de Araujo
    Barbosa de Lima, Antonio Gilson
    APPLIED THERMAL ENGINEERING, 2013, 55 (1-2) : 78 - 86
  • [3] On the modeling of drying process in an industrial tunnel dryer
    Francisca V.S.T.
    Atacy M.M.C.
    Maria J.F.
    Anderson F.V.
    Ana R.C.L.
    Luan P.M.A.
    Antonio G.B.L.
    Defect and Diffusion Forum, 2020, 400 : 51 - 56
  • [4] Heat and Mass Transfer and Volume Variations during Drying of Industrial Ceramic Bricks: An Experimental Investigation
    Barbosa da Silva, J.
    Silva Almeida, G.
    Araujo Neves, G.
    Barbosa de Lima, W. C. P.
    Farias Neto, S. R.
    Barbosa de Lima, A. G.
    DIFFUSION IN SOLIDS AND LIQUIDS VII, 2012, 326-328 : 267 - +
  • [5] Drying of industrial hollow ceramic brick: A numerical analysis using CFD
    Vasconcellos Araújo M.
    Sousa Santos R.
    Moura da Silva R.
    Silva do Nascimento J.B.
    Gomes dos Santos W.R.
    Barbosa de Lima A.G.
    Defect and Diffusion Forum, 2019, 391 : 48 - 53
  • [6] Design and development of energy efficient solar tunnel dryer for industrial drying
    Rathore, N. S.
    Panwar, N. L.
    CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, 2011, 13 (01) : 125 - 132
  • [7] Numerical simulation of concrete hollow bricks by the finite volume method
    Sun, Jiapeng
    Fang, Liang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (23-24) : 5598 - 5607
  • [8] Design and development of energy efficient solar tunnel dryer for industrial drying
    N. S. Rathore
    N. L. Panwar
    Clean Technologies and Environmental Policy, 2011, 13 : 125 - 132
  • [9] Drying of industrial hollow ceramic brick: Analysis of the moisture content and temperature parameters
    Araújo M.V.
    Santos R.S.
    Silva R.M.
    Barbosa de Lima A.G.
    Araújo, M.V. (morganamva@gmail.com), 1600, Trans Tech Publications Ltd (380): : 72 - 78
  • [10] Drying and volumetric retraction of solid and hollow ceramic bricks: a theoretical and experimental investigation
    Batista, V. R.
    Nascimento, J. J. S.
    de Lima, A. G. B.
    MATERIA-RIO DE JANEIRO, 2009, 14 (04): : 1088 - 1100
1234