Drying of Ceramic Hollow Bricks in an Industrial Tunnel Dryer: A Finite Volume Analysis

被引：0
|
作者：
de Souza Tavares, Francisca Valdeiza [1 ]
de Farias Neto, Severino Rodrigues [2 ]
Barbosa, Enivaldo Santos [1 ]
Barbosa de Lima, Antonio Gilson [1 ]
Joaquina E Silva, Carlota [1 ]
机构：
[1] Fed Univ Campina Grande UFCG, Dept Mech Engn, BR-58429900 Campina Grande, PB, Brazil
[2] Fed Univ Campina Grande UFCG, Dept Chem Engn, BR-58429900 Campina Grande, PB, Brazil
来源：
INTERNATIONAL JOURNAL OF MULTIPHYSICS | 2014年 / 8卷 / 03期
关键词：
Simulation; MASS; Heat; Brick; Drying;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper aims to study the drying of industrial hollow bricks in a tunnel dryer cross flow type. The theoretical model Is based on mass and energy conservation equations applied to air and product. To validate the methodology, numerical and experimental results for the moisture content and the temperature of brick during the drying in an industrial scale are compared and a good correlation was obtained. Results of moisture content and temperature of the product, and temperature, relative humidity and absolute humidity of drying air as a function of drying time and position in the dryer are presented and analyzed.
引用
收藏
页码：297 / 311
页数：15
相关论文
共 32 条
  • [21] Energetic and exergetic analysis of walk-in type solar tunnel dryer for Kasuri Methi (Fenugreek) leaves drying
    Panwar, N. L.
    INTERNATIONAL JOURNAL OF EXERGY, 2014, 14 (04) : 519 - 531
  • [22] Rice Grain Physical and Chemical analysis from Paddy Drying by Using a Solar Tunnel Dryer at Prathum Tani, Thailand
    Sookramoon, Krissadang
    Khamwachirapithak, Mananya
    2016 3RD INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND APPLICATIONS (ICIEA 2016), 2016, 68
  • [23] Thin layer drying kinetics and exergy analysis of turmeric (Curcuma longa) in a mixed mode forced convection solar tunnel dryer
    Karthikeyan, A. K.
    Murugavelh, S.
    RENEWABLE ENERGY, 2018, 128 : 305 - 312
  • [24] Optimization of the configuration of 290 x 140 x 90 hollow clay bricks with 3-D numerical simulation by finite volume method
    Li, L. P.
    Wu, Z. G.
    He, Y. L.
    Lauriat, G.
    Tao, W. Q.
    ENERGY AND BUILDINGS, 2008, 40 (10) : 1790 - 1798
  • [25] Characterization and analysis of the drying real process in an industrial olive-oil mill waste rotary dryer: A case of study in Andalusia
    Gomez-de la Cruz, Francisco J.
    Casanova-Pelaez, Pedro J.
    Palomar-Carnicero, Jose M.
    Cruz-Peragon, Fernando
    APPLIED THERMAL ENGINEERING, 2017, 116 : 1 - 10
  • [26] A finite volume analysis of vacuum freeze drying processes of skim milk solution in trays and vials
    Song, CS
    Nam, JH
    Kim, CJ
    Ro, ST
    DRYING TECHNOLOGY, 2002, 20 (02) : 283 - 305
  • [27] Exergy analysis and mathematical modelling of orange peels drying in a mixed mode solar tunnel dryer and under the open sun: a study on performance enhancement
    Karthikeyan, A. K.
    Natarajan, R.
    INTERNATIONAL JOURNAL OF EXERGY, 2017, 24 (2-4) : 235 - 253
  • [28] Numerical Thermal Analysis of Applying Insulation Material to Holes in Hollow Brick Walls by the Finite-Volume Method
    Tang, D. L.
    Li, L. P.
    Song, C. F.
    Tao, W. Q.
    He, Y. L.
    NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2015, 68 (05) : 526 - 547
  • [29] Thermal shock features of ceramic nozzle and its finite element analysis in coal water slurry industrial boiler
    Hunan Engineering Technology Key Lab. of Inorganic and Nonmetal Materials, Hunan University of Technology, Zhuzhou 412008, China
    不详
    Mocaxue Xuebao, 2007, 5 (482-486):
  • [30] Numerical modeling of a hybrid greenhouse solar dryer with single-pass solar air heater for bitter gourd flakes drying: a finite element analysis
    Kumar, Lalan
    Prakash, Om
    Pandey, Vijay kumar
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2024, 49 (04):
1234