Drying of industrial hollow ceramic brick: A numerical analysis using CFD

被引：7
|
作者：
Vasconcellos Araújo M. [1 ]
Sousa Santos R. [2 ]
Moura da Silva R. [3 ]
Silva do Nascimento J.B. [1 ]
Gomes dos Santos W.R. [1 ]
Barbosa de Lima A.G. [1 ]
机构：
[1] Department of Mechanical Engineering, Federal University of Campina Grande, Campina Grande-PB
[2] Department of Sciences and Technology, Rural Federal University of the Semi-Arid, Caraúbas-RN
[3] Federal Institute of Education, Science and Technology of Paraíba, Princesa Isabel-PB
来源：
Defect and Diffusion Forum | 2019年 / 391卷
关键词：
Brick; Ceramics; CFD; Heat; Mass;
D O I：
10.4028/www.scientific.net/DDF.391.48
中图分类号：
学科分类号：
摘要：
The drying process can be defined how unit operation for removing water of one moist solid to an unsaturated gaseous phase due to heat transfer. Numerical simulation emerges like a tool that allows the reproduction of drying experiments using computers and suitable softwares. In this sense, this works aims to predict drying process of an industrial hollow ceramic brick inside the kiln using computational fluid dynamics analysis. For one drying temperature of 60°C, results of the drying and heating kinetics, and moisture content, velocity and temperature distributions are shown and analyzed. A comparison between predicted and experimental data of the moisture content and temperature of the brick along the process was done and a good agreement was obtained. © 2019 Trans Tech Publications, Switzerland
引用
收藏
页码：48 / 53
页数：5
相关论文
共 50 条
  • [1] Industrial Ceramic Brick Drying in Oven by CFD
    Araujo, Morgana de Vasconcellos
    Pereira, Antonildo Santos
    de Oliveira, Jessica Lacerda
    Agra Brandao, Vanderson Alves
    Brasileiro Filho, Francisco de Assis
    da Silva, Rodrigo Moura
    Barbosa de Lima, Antonio Gilson
    MATERIALS, 2019, 12 (10)
  • [2] Drying of industrial hollow ceramic brick: Analysis of the moisture content and temperature parameters
    Araújo M.V.
    Santos R.S.
    Silva R.M.
    Barbosa de Lima A.G.
    Araújo, M.V. (morganamva@gmail.com), 1600, Trans Tech Publications Ltd (380): : 72 - 78
  • [3] Drying of Ceramic Hollow Bricks in an Industrial Tunnel Dryer: A Finite Volume Analysis
    de Souza Tavares, Francisca Valdeiza
    de Farias Neto, Severino Rodrigues
    Barbosa, Enivaldo Santos
    Barbosa de Lima, Antonio Gilson
    Joaquina E Silva, Carlota
    INTERNATIONAL JOURNAL OF MULTIPHYSICS, 2014, 8 (03) : 297 - 311
  • [4] Corrosion of ceramic brick in industrial chimneys
    Stryszewska, Teresa
    OCHRONA PRZED KOROZJA, 2011, 54 (06): : 282 - 284
  • [5] Numerical Analysis of Heat Transfer through Hollow Brick Using Finite-Difference Method
    Miroshnichenko, Igor, V
    Gibanov, Nikita S.
    Sheremet, Mikhail A.
    AXIOMS, 2022, 11 (02)
  • [6] A numerical study on thermal drying of moist brick
    Faculty of Engineering, University of Guilan, P. O. Box 3756, Rasht, Iran
    International Journal of Heat and Technology, 2008, 26 (01) : 61 - 65
  • [7] Convective Drying of Ceramic Bricks by CFD: Transport Phenomena and Process Parameters Analysis
    Araujo, Morgana de Vasconcellos
    de Brito Correia, Balbina Raquel
    Agra Brandao, Vanderson Alves
    de Oliveira, Iran Rodrigues
    Santos, Rosilda Sousa
    de Oliveira Neto, Guilherme Luiz
    de Lucena Silva, Leonardo Pereira
    Barbosa de Lima, Antonio Gilson
    ENERGIES, 2020, 13 (08)
  • [8] Static and dynamic thermal characterisation of a hollow brick wall:: Tests and numerical analysis
    Sala, J. M.
    Urresti, A.
    Martin, K.
    Flores, I.
    Apaolaza, A.
    ENERGY AND BUILDINGS, 2008, 40 (08) : 1513 - 1520
  • [9] Behind the Manufacturing of Industrial Clay Bricks: Drying Stage Predictions Using CFD
    Santos, R. S.
    Delgado, J. M. P. Q.
    Silva, F. A. N.
    Azevedo, A. C.
    Farias Neto, S. R.
    Farias, F. P. M.
    Barbosa de Lima, A. G.
    Barbosa de Lima, W. M. P.
    Lima, E. S.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [10] CFD analysis of a syngas-fired burner for ceramic industrial roller kiln
    Cavazzuti, Marco
    Corticelli, Mauro A.
    Nuccio, Antonino
    Zauli, Bruno
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2013, 227 (11) : 2600 - 2609
12345