2-DIMENSIONAL STRESS-ANALYSIS OF ADHESIVE BUTT JOINTS SUBJECTED TO CLEAVAGE LOADS

被引：9
|
作者：
TEMMA, K
SAWA, T
IWATA, A
机构：
[1] Kisarazu National College of Technology, Kisarazu, Chiba, 292
来源：
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1990年 / 10卷 / 04期
关键词：
adhesion; butt joint; cleavage loads; elasticity; photoelasticity; stress analysis;
D O I：
10.1016/0143-7496(90)90047-2
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
This paper deals with the two-dimensional stress analysis of adhesive butt joints subjected to cleavage loads. The purpose of the paper is to contribute to the establishment of fracture criteria of adhesive joints. Similar adherends and an adhesive bond are replaced with finite strips in the analysis. Stress distributions in adhesive joints are analysed using the two-dimensional theory of elasticity. The effects of the ratio of Young's modulus of adherends to that of an adhesive and the thickness of the adhesive bonds on the stress distributions are shown by numerical calculations. For verification, strains produced on adherends are experimentally measured and a photoelastic experiment is carried out. The analytical results are in fairly good agreement with experiment. © 1990.
引用
收藏
页码：285 / 293
页数：9
相关论文
共 50 条
  • [31] Two-Dimensional Stress Analysis of Adhesive Butt Joints Filled With Elastic Circular Fillers in the Adhesive Subjected to Static Tensile Loadings
    Sawa, Toshiyuki
    Akita, Yosuke
    Iwamoto, Takeshi
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2009, 23 (02) : 195 - 214
  • [32] Two-dimensional stress analysis of adhesive butt joints filled with elastic circular fillers in the adhesive subjected to static tensile loadings
    Sawa, Toshiyuki
    Akita, Yosuke
    Iwamoto, Takeshi
    Journal of Adhesion Science and Technology, 2009, 23 (02): : 195 - 214
  • [33] Two-dimensional transient thermal stress analysis of adhesive butt joints
    Katsuo, M
    Nakano, Y
    Sawa, T
    JOURNAL OF ADHESION, 1999, 70 (1-2): : 75 - 93
  • [34] Three-dimensional finite element analysis of stress response in adhesive butt joints subjected to impact tensile leads
    Higuchi, I
    Sawa, T
    Okuno, H
    JOURNAL OF ADHESION, 1999, 69 (1-2): : 59 - 82
  • [35] Three-dimensional finite element analysis of stress response in adhesive butt joints subjected to impact bending moments
    Higuchi, I
    Sawa, T
    Okuno, H
    Kato, S
    JOURNAL OF ADHESION, 2003, 79 (11): : 1017 - 1039
  • [36] 2-DIMENSIONAL CREEP ANALYSIS OF STRUCTURAL ADHESIVE JOINTS
    SU, N
    MACKIE, RI
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1993, 13 (01) : 33 - 40
  • [37] Two-dimensional stress analysis of single-lap adhesive joints subjected to tensile shear loads
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1995, 61 (589): : 1994 - 2002
  • [38] TWO-DIMENSIONAL FEM STRESS ANALYSIS OF ADHESIVE BUTT JOINTS FILLED WITH NANO-COMPOSITE IN ADHESIVE SUBJECTED TO STATIC TENSILE LOADING
    Sawa, Toshiyuki
    Tanabe, Shogo
    Kobayashi, Takashi
    Kotajima, Kazunari
    Sekiguchi, Yasuhisa
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2011, VOL 3, 2012, : 449 - 455
  • [39] JOINT - A NEW STRESS-ANALYSIS METHOD FOR ADHESIVE JOINTS
    MALLICK, V
    STONE, MH
    VIDE-SCIENCE TECHNIQUE ET APPLICATIONS, 1994, (272): : 528 - 531
  • [40] Three-dimensional finite element analysis of stress response in adhesive scarf joints subjected to impact tensile loads
    Sawa, T
    Higuchi, I
    Shimura, J
    ADHESIVE JOINTS: FORMATION, CHARACTERISTICS AND TESTING, VOL 2, 2002, : 257 - 272
12345