2-DIMENSIONAL STRESS-ANALYSIS OF ADHESIVE BUTT JOINTS SUBJECTED TO CLEAVAGE LOADS

被引：9

作者：

TEMMA, K

SAWA, T

IWATA, A

机构：

[1] Kisarazu National College of Technology, Kisarazu, Chiba, 292

来源：

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES | 1990年 / 10卷 / 04期

关键词：

adhesion; butt joint; cleavage loads; elasticity; photoelasticity; stress analysis;

D O I：

10.1016/0143-7496(90)90047-2

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

This paper deals with the two-dimensional stress analysis of adhesive butt joints subjected to cleavage loads. The purpose of the paper is to contribute to the establishment of fracture criteria of adhesive joints. Similar adherends and an adhesive bond are replaced with finite strips in the analysis. Stress distributions in adhesive joints are analysed using the two-dimensional theory of elasticity. The effects of the ratio of Young's modulus of adherends to that of an adhesive and the thickness of the adhesive bonds on the stress distributions are shown by numerical calculations. For verification, strains produced on adherends are experimentally measured and a photoelastic experiment is carried out. The analytical results are in fairly good agreement with experiment. © 1990.

引用

页码：285 / 293

页数：9

共 50 条

[21] STRESS-ANALYSIS OF AN ADHESIVE BUTT JOINT WITH 2 SOLID SHAFTS SUBJECTED TO TORSIONAL LOADING
NAKANO, Y
SAWA, T
ARAI, S
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1989, 9 (02) : 83 - 87
[22] Two-dimensional stress analysis and strength evaluation of band adhesive butt joints of dissimilar adherends subjected to tensile loads
Sawa, Toshiyuki
Temma, Katuhiro
Nishigaya, Tohru
Nakano, Yuichi
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1993, 59 (563): : 1763 - 1770
[23] Finite element stress response analysis of butt adhesive joints of hollow cylinders subjected to impact tensile loads
Sawa, T
Suzuki, Y
Higuchi, I
IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 2001, : 469 - 474
[24] TWO-DIMENSIONAL STRESS ANALYSIS OF ADHESIVE BUTT JOINTS SUBJECTED TO EXTERNAL BENDING MOMENTS.
Sawa, Toshiyuki
Iwata, Akihiro
Temma, Katsuhiro
Ishikawa, Hirohisa
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1986, 52 (483): : 2506 - 2512
[25] STRESS-ANALYSIS OF T-TYPE BUTT ADHESIVE JOINT SUBJECTED TO EXTERNAL BENDING MOMENTS
SAWA, T
NAKANO, Y
TEMMA, K
JOURNAL OF ADHESION, 1987, 24 (01): : 1 - 15
[26] 2-DIMENSIONAL THERMAL-STRESS ANALYSIS OF BUTT ADHESIVE JOINT CONTAINING RIGID FILLERS IN THE ADHESIVE
NAKAGAWA, F
NAKANO, Y
SAWA, T
JSME INTERNATIONAL JOURNAL SERIES A-MECHANICS AND MATERIAL ENGINEERING, 1994, 37 (03): : 238 - 245
[27] Two-dimensional stress analysis of butt adhesive joints with a circular hole defect in adhesive (the case where joints are subjected to external bending moments)
Temma, Katsuhiro, 1600, (55):
[28] A two-dimensional stress analysis of single-lap adhesive joints subjected to tensile loads
Sawa, T
Nakano, K
Toratani, H
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1997, 11 (08) : 1039 - 1062
[29] A two-dimensional stress analysis of single-lap adhesive joints subjected to tensile loads
Department of Mechanical Engineering, Yamanashi University, 4-3-11, Takeda, Kofu, Yamanashi 400, Japan
不详
不详
J Adhes Sci Technol, 8 (1039-1062):
[30] VISCOELASTIC AND VISCOPLASTIC STRESS-ANALYSIS OF ADHESIVE JOINTS
GROTH, HL
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1990, 10 (03) : 207 - 213

← 1 2 3 4 5 →