A CUTTING FORCE MODEL FOR FACE MILLING OPERATIONS

被引：62
|
作者：
KIM, HS
EHMANN, KF
机构：
[1] Yeungnam University, Kyeungsan City
[2] Mechanical Engineering Department, Northwestern University, Evanston, IL 60208
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1993年 / 33卷 / 05期
关键词：
D O I：
10.1016/0890-6955(93)90099-G
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A procedure for the simulation of the static and dynamic cutting forces in face milling is described. For the static force model, the initial position errors of the inserts and the eccentricity of the spindle are taken into consideration as the major factors affecting the variation of the chip cross-section. The structural dynamics model for the multi-tooth oblique cutting operation is assumed as a multi-degrees of freedom spatial system. From the relative displacements of this system, based on the double modulation principle, the dynamic cutting forces were derived and simulated. The simulated forces were subsequently compared to measured forces in the time and frequency domains.
引用
收藏
页码：651 / 673
页数：23
相关论文
共 50 条
  • [41] Cutting Force Model for Heat Assisted Titanium Alloy Milling
    Liu, Changyi
    [J]. ADVANCES IN MATERIALS AND MATERIALS PROCESSING IV, PTS 1 AND 2, 2014, 887-888 : 1191 - 1194
  • [42] A mechanistic model of cutting force in the micro end milling process
    Kang, I. S.
    Kim, J. S.
    Kim, J. H.
    Kang, M. C.
    Seo, Y. W.
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 250 - 255
  • [43] Accurate cutting force prediction of helical milling operations considering the cutter runout effect
    Zhou-Long Li
    Ye Ding
    Li-Min Zhu
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 92 : 4133 - 4144
  • [44] Dynamic neural network approach for tool cutting force modelling of end milling operations
    Cus, Franc
    Zuperl, Uros
    Milfelner, Matjaz
    [J]. INTERNATIONAL JOURNAL OF GENERAL SYSTEMS, 2006, 35 (05) : 603 - 618
  • [45] Accurate cutting force prediction of helical milling operations considering the cutter runout effect
    Li, Zhou-Long
    Ding, Ye
    Zhu, Li-Min
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 4133 - 4144
  • [46] Study of the classification of cutting forces and the build of accurate milling force model in end milling
    Kang, Yonggang
    Wang, Zhongqi
    Lou, Wenming
    Jiang, Chengyu
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 636 - +
  • [47] PREDICTING CUTTING FORCES IN FACE MILLING
    YOUNG, HT
    MATHEW, P
    OXLEY, PLB
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1994, 34 (06): : 771 - 783
  • [48] Cutting force prediction in end milling of curved surfaces based on oblique cutting model
    Luo, Zhi-Wen
    Zhao, Wen-Xiang
    Jiao, Li
    Wang, Tao
    Yan, Pei
    Wang, Xi-Bin
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 89 (1-4): : 1025 - 1038
  • [49] Cutting force prediction in end milling of curved surfaces based on oblique cutting model
    Zhi-Wen Luo
    Wen-Xiang Zhao
    Li Jiao
    Tao Wang
    Pei Yan
    Xi-Bin Wang
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 89 : 1025 - 1038
  • [50] A New Cutting Force Model for Micro-milling and Determination of Optimal Cutting Parameters
    Wang, Shih-Ming
    Chiang, Zou-Sung
    Chen, Da-Fun
    Tsai, Yao-Yang
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2010, 83-86 : 680 - +
12345