A CUTTING FORCE MODEL FOR FACE MILLING OPERATIONS

被引：62
|
作者：
KIM, HS
EHMANN, KF
机构：
[1] Yeungnam University, Kyeungsan City
[2] Mechanical Engineering Department, Northwestern University, Evanston, IL 60208
来源：
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1993年 / 33卷 / 05期
关键词：
D O I：
10.1016/0890-6955(93)90099-G
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A procedure for the simulation of the static and dynamic cutting forces in face milling is described. For the static force model, the initial position errors of the inserts and the eccentricity of the spindle are taken into consideration as the major factors affecting the variation of the chip cross-section. The structural dynamics model for the multi-tooth oblique cutting operation is assumed as a multi-degrees of freedom spatial system. From the relative displacements of this system, based on the double modulation principle, the dynamic cutting forces were derived and simulated. The simulated forces were subsequently compared to measured forces in the time and frequency domains.
引用
收藏
页码：651 / 673
页数：23
相关论文
共 50 条
  • [21] Modified power prediction model based on infinitesimal cutting force during face milling process
    Xiaona Luan
    Song Zhang
    Gang Li
    [J]. International Journal of Precision Engineering and Manufacturing-Green Technology, 2018, 5 : 71 - 80
  • [22] Modified Power Prediction Model Based on Infinitesimal Cutting Force during Face Milling Process
    Luan, Xiaona
    Zhang, Song
    Li, Gang
    [J]. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2018, 5 (01) : 71 - 80
  • [23] COMPUTER DESIGN OF A MINIMUM VIBRATION FACE MILLING CUTTER USING AN IMPROVED CUTTING FORCE MODEL
    DOOLAN, P
    PHADKE, MS
    WU, SM
    [J]. JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1976, 98 (03): : 807 - 810
  • [24] Effects of cutting conditions on forces and force coefficients in plunge milling operations
    Rafanelli, Francesco
    Campatelli, Gianni
    Scippa, Antonio
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2015, 7 (06): : 1 - 9
  • [25] Model for cutting forces in high speed face milling
    Kulenovic, M.
    Halilagic, D.
    Cekic, A.
    [J]. ANNALS OF DAAAM FOR 2005 & PROCEEDINGS OF THE 16TH INTERNATIONAL DAAAM SYMPOSIUM: INTELLIGENT MANUFACTURING & AUTOMATION: FOCUS ON YOUNG RESEARCHES AND SCIENTISTS, 2005, : 213 - 214
  • [26] Modeling micro-end-milling operations. Part I: analytical cutting force model
    Bao, WY
    Tansel, IN
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (15): : 2155 - 2173
  • [27] An improved cutting force prediction model in the milling process with a multi-blade face milling cutter based on FEM and NURBS
    Cai, Sijie
    Yao, Bin
    Feng, Wei
    Cai, Zhiqin
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (5-8): : 2487 - 2499
  • [28] An improved cutting force prediction model in the milling process with a multi-blade face milling cutter based on FEM and NURBS
    Sijie Cai
    Bin Yao
    Wei Feng
    Zhiqin Cai
    [J]. The International Journal of Advanced Manufacturing Technology, 2019, 104 : 2487 - 2499
  • [29] A semi-analytical model for cutting force prediction in face-milling of spiral bevel gears
    Zheng, Fangyan
    Han, Xinghui
    Hua, Lin
    Tan, Rulong
    Zhang, Weiqing
    [J]. MECHANISM AND MACHINE THEORY, 2021, 156
  • [30] An enhanced cutting force model for face milling with variable cutter feed motion and complex workpiece geometry
    Gu, F
    Kapoor, SG
    DeVor, RE
    Bandyopadhyay, P
    [J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1997, 119 (4A): : 467 - 475
12345