ATMOSPHERE CONTROL DURING DEBINDING OF POWDER INJECTION-MOLDED PARTS

被引：5
|
作者：
MOORE, JA
JARDING, BP
LOGRASSO, BK
ANDERSON, IE
机构：
[1] Ames Laboratory, Metallurgy and Ceramics Div., Iowa State University, Ames, Iowa
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1995年 / 4卷 / 03期
关键词：
DEBINDING; SINTERING; INJECTION MOLDING;
D O I：
10.1007/BF02649064
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Atmosphere control during debinding of powder injection molded (PIM) parts is an important parameter to consider. Experimental results have shown that a stagnant atmosphere containing volatiles evolved during debinding can cause slumping of the green samples. Removal of volatiles from the sample zone aids debinding and can reduce cycle times and improve sample quality. Residual carbon and oxygen can be controlled during debinding by adjusting the atmosphere composition. This paper presents the results of PIM 70 vol% spherical copper powder and 30 vol% binder. Debinding atmospheres were altered to determine the effect of debinding on the green body and the sintered sample.
引用
收藏
页码：275 / 282
页数：8
相关论文
共 50 条
  • [41] The Cell Forming Process of Microcellular Injection-Molded Parts
    Dong, Guiwei
    Zhao, Guoqun
    Guan, Yanjin
    Wang, Guilong
    Wang, Xiaoxin
    JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (12)
  • [42] Topology optimization: Use in the development of injection-molded parts
    Lutter F.
    VDI Berichte, 2019, (4354): : 69
  • [43] FASTER PRODUCTION OF INJECTION-MOLDED PARTS BY SIMULTANEOUS ENGINEERING
    NEDESS, C
    KOSIN, T
    KUNSTSTOFFE-GERMAN PLASTICS, 1993, 83 (11): : 871 - 874
  • [44] Gating guide for long thin injection-molded parts
    Ni, SJ
    MACHINE DESIGN, 1996, 68 (22) : 122 - &
  • [45] ON THE STRENGTH OF KNIT-LINES IN INJECTION-MOLDED PARTS
    MOSLE, HG
    CRIENS, RM
    DICK, H
    PLASTICS ENGINEERING, 1984, 40 (03) : 42 - 42
  • [46] Effect of polymer properties on the structure of injection-molded parts
    Ben Daly, H
    Sanschagrin, B
    Nguyen, TK
    Cole, KC
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (09): : 1736 - 1751
  • [47] HOW TO STRENGTHEN WELD LINES IN INJECTION-MOLDED PARTS
    MALGUARNERA, SC
    PLASTICS ENGINEERING, 1981, 37 (05) : 35 - 36
  • [48] Effect of Thermal Debinding Conditions on the Sintered Density of Low-Pressure Powder Injection Molded Iron Parts
    Tafti, Atefeh A.
    Demers, Vincent
    Majdi, Seyed Mohammad
    Vachon, Guillem
    Brailovski, Vladimir
    METALS, 2021, 11 (02) : 1 - 14
  • [49] Effects of Debinding and Sintering Atmosphere on Properties and Corrosion Resistance of Powder Injection Molded 316 L - Stainless Steel
    Raza, Muhammad Rafi
    Ahmad, Faiz
    Muhamad, Norhamidi
    Sulong, Abu Bakar
    Omar, M. A.
    Akhtar, Majid Niaz
    Aslam, Muhammad
    Sherazi, Irfan
    SAINS MALAYSIANA, 2017, 46 (02): : 285 - 293
  • [50] Highly porous Fe-2wt%P alloy produced by plasma assisted debinding and sintering of injection-molded parts
    Daudt, N. F.
    Schutz dos Santos, T. L.
    Limberger, I. F.
    Seeger, R. L.
    Dorneles, L. S.
    Binder, C.
    Schaeffer, L.
    MATERIALS LETTERS, 2018, 231 : 163 - 166
12345