Investigations on Erosion and Corrosion Behavior of High-Velocity Oxy-Fuel Sprayed WC-Cr3C2-Ni Coatings on AISI 1018 Steel

被引：3
|
作者：
Ravichandran, M. [1 ]
Saravanan, S. [2 ]
Balasubramaniyan, V. [3 ]
机构：
[1] Chendhuran Coll Engn & Technol, Dept Mech Engn, Pudukkottai 622507, Tamil Nadu, India
[2] Star Lion Coll Engn & Technol, Dept Mech Engn, Manangorai, Tamil Nadu, India
[3] Annamalai Univ, CEMAJOR, Annamalainagar 608002, Tamil Nadu, India
来源：
HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS | 2016年 / 71卷 / 04期
关键词：
HVOF; high-velocity oxy-fuel; mild steel 1018; corrosion; erosion; WC-Cr3C2-Ni;
D O I：
10.3139/105.110291
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
WC-Cr3C2-Ni thermal spray coatings was applied on the surface of low carbon steel (AISI 1018) using high-velocity oxy-fuel (HVOF) process. The base metal, coating powder and coated materials were analyzed using scanning electron microscope. Water-jet erosion test (WJET) was used to test the mass loss of the samples with different process parameters such as impingement angle, water jet velocity, erodent discharge, and stand-off distance. As results lower mass loss was observed for the selected process parameters. Pitting corrosion test reveals that better corrosion resistance can be achieved for the low carbon steels by WC-Cr3C2-Ni powder coating.
引用
收藏
页码：163 / 169
页数：7
相关论文
共 50 条
  • [21] Sliding and erosion wear behaviour of thermal sprayed WC-Cr3C2-Ni coatings
    Bhosale, Digvijay G.
    Prabhu, T. Ram
    Rathod, Walmik S.
    SURFACE & COATINGS TECHNOLOGY, 2020, 400
  • [22] Thermal shock resistance of WC-Cr3C2-Ni coatings deposited via high-velocity air fuel spraying
    Zhang, Diyao
    Hu, Shuming
    Peng, Zijun
    Liu, Zhenli
    Yu, Jingkun
    Yuan, Lei
    SURFACE & COATINGS TECHNOLOGY, 2024, 487
  • [23] Corrosion behavior and microstructure of high-velocity oxy-fuel sprayed nickel-base amorphous/nanocrystalline coatings
    Dept. of Mat. Eng. and Mat. Design, University of Nottingham, University Park, Nottingham, NG7 2RD, United Kingdom
    J Therm Spray Technol, 3 (399-404):
  • [24] Effects of erosion rate on the erosion-corrosion synergism of high velocity oxy-fuel sprayed Ni-based coatings
    Zhang, An-Feng
    Wang, Yu-Yue
    Li, Chang-jiu
    SURFACE ENGINEERING (ICSE 2007), 2008, 373-374 : 585 - +
  • [25] Slurry erosion performance analysis and characterization of high-velocity oxy-fuel sprayed Ni and Co hardsurfacing alloy coatings
    Singh J.
    Journal of King Saud University - Engineering Sciences, 2023, 35 (06) : 415 - 429
  • [26] Erosion-corrosion behaviour of high-velocity oxy-fuel Ni-Cr-Mo-Si-B coatings under high-velocity seawater jet impingement
    Shrestha, S
    Hodgkiess, T
    Neville, A
    WEAR, 2005, 259 (1-6) : 208 - 218
  • [27] Investigation of wear resistance of high velocity oxy-fuel sprayed WC-Co and Cr3C2-NiCr coatings
    Zdravecka, E.
    Suchanek, J.
    Tkacova, J.
    Trpcevska, J.
    Brinkiene, K.
    MECHANIKA, 2010, (04): : 75 - 79
  • [28] Slurry and dry erosion of high velocity oxy-fuel thermal sprayed coatings
    Arsenault, B
    Immarigeon, JP
    Parameswaran, VR
    Hawthorne, H
    Legoux, JG
    THERMAL SPRAY, VOLS 1 AND 2: MEETING THE CHALLENGES OF THE 21ST CENTURY, 1998, : 231 - 236
  • [29] Effect of carbon nanotubes on microhardness and adhesion strength of high-velocity oxy-fuel sprayed NiCr-Cr3C2 coatings
    Kuruba, Manjunatha
    Gaikwad, Giridhara
    Natarajan, Jegadeeswaran
    Koppad, Praveennath G.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2022, 236 (01) : 86 - 96
  • [30] High-Temperature Erosion-Corrosion Performance of High-Velocity Oxy-Fuel Sprayed Ni-20 Cr Coating in Actual Boiler Environment
    G. Kaushal
    H. Singh
    S. Prakash
    Metallurgical and Materials Transactions A, 2011, 42 : 1836 - 1846
12345