Friction Analysis of Oil Control Rings during Running-In

被引：4

作者：

Kunkel, Sebastian ^{[1
]}

Zimmer, Thomas ^{[1
]}

Wachtmeister, Georg ^{[1
]}

机构：

[1] TU Muenchen, Munich, Germany

来源：

SAE INTERNATIONAL JOURNAL OF ENGINES | 2012年 / 5卷 / 03期

关键词：

D O I：

10.4271/2011-01-2428

中图分类号：

U [交通运输];

学科分类号：

08 ; 0823 ;

摘要：

This SAE Technical Paper will give a summary of the detailed results of crank-angle-resolved friction measurements which were carried out in motored and pressureless operation on a floating liner single cylinder test engine with a displacement of 0.5 liters. Friction forces that occur during running-in are introduced and discussed with regard to mixed friction and hydrodynamic friction for different oil control rings. Three different ring pre-loads are examined using constant geometries. In a second test series, the outer contour and coating is varied while the pre-load stays constant.

引用

页码：747 / 758

页数：12

共 50 条

[21] Origin of Friction in Running-in Sliding Wear of Nitride Coatings
Luo, Q.
TRIBOLOGY LETTERS, 2010, 37 (03) : 529 - 539
[22] EXPERIMENTAL INVESTIGATION INTO RUNNING-IN OF SLIDING FRICTION BEARINGS AT THE BOUNDARY OF MIXED FRICTION
PUSTYNTSEV, EN
RUSSIAN ENGINEERING JOURNAL, 1978, 58 (03): : 39 - 41
[23] Origin of Friction in Running-in Sliding Wear of Nitride Coatings
Q. Luo
Tribology Letters, 2010, 37 : 529 - 539
[24] Experimentally verified prediction of friction coefficient and wear rate during running-in dry contact
Ghatrehsamani, Sahar
Akbarzadeh, Saleh
Khonsari, M. M.
TRIBOLOGY INTERNATIONAL, 2022, 170
[25] Modification of statistical characteristics of friction surfaces in the process of running-in
Baranov, V.M.
Kudryavtsev, E.M.
Sarychev, G.A.
Stopyra, A.Z.
Trenie i Iznos, 2002, 23 (01): : 47 - 59
[26] Running-in of a Double Network Gel for Low Friction in Water
Kanda, Koki
Adachi, Koshi
TRIBOLOGY ONLINE, 2021, 16 (03): : 170 - 177
[27] OPTIMIZING RUNNING-IN CONDITIONS OF ANTI-FRICTION MATERIALS
SILIN, LV
RUSSIAN ENGINEERING JOURNAL, 1974, 54 (12): : 41 - 42
[28] ESTIMATION OF RUNNING-IN PROCESS BY MEANS OF FRICTION PATTERNS.
Sato, Hiroki
Kyogoku, Keiji
Chao, Sueng-yi
Nakahara, Tsunamitsu
1600, (31):
[29] Running-in of a double network gel for low friction in water
Kanda K.
Adachi K.
Tribology Online, 2021, 16 (03) : 170 - 177
[30] Friction and wear properties of PTFE-based friction material used in ultrasonic motor during running-in stage
Li, Jin-Bang
Qu, Jian-Jun
Mocaxue Xuebao/Tribology, 2015, 35 (02): : 176 - 182

← 1 2 3 4 5 →