MINIEMULSION COPOLYMERIZATION OF VINYL-ACETATE AND BUTYL ACRYLATE .4. KINETICS OF THE COPOLYMERIZATION

The copolymerization kinetics of conventional emulsions and miniemulsions of 50:50 and 25:75 molar ratios vinyl acetate–butyl acrylate monomer mixtures were studied using sodium hexadecyl sulfate as surfactant. Hexadecane was the cosurfactant used in the preparation of the miniemulsions, and ammonium persulfate was the initiator used in the polymerizations. The rate of polymerization showed four regions which extended to different conversions depending on the type of emulsion used (conventional or miniemulsion). The rate of polymerization for the miniemulsion process was always slower than for the conventional process. The dependence of the rate on the initiator concentration was higher for the miniemulsion process. The number of particles nucleated in the miniemulsion copolymerization process was lower than in the conventional emulsion copolymerization process. The initiator and surfactant concentration dependence of the number of particles were 0.8 and 0.25 for the miniemulsion copolymerization process and 0.0 and 0.68 for the conventional emulsion copolymerization process respectively. These effects were attributed to the different particle nucleation mechanism operating in each process. Copyright © 1990 John Wiley & Sons, Inc.