LOAD-BEARING BEHAVIOR OF FULLY GROUTED ANCHORS UNDER SHOCK LOADING

被引：2
|
作者：
HAGEDORN, H
机构：
[1] Amberg Consulting Engineers, CH-8105 Regensdorf-Watt
来源：
SOIL DYNAMICS AND EARTHQUAKE ENGINEERING | 1994年 / 13卷 / 02期
关键词：
Anchorages; (foundations);
D O I：
10.1016/0267-7261(94)90002-7
中图分类号：
P5 [地质学];
学科分类号：
0709 ; 081803 ;
摘要：
The load bearing behaviour of fully grouted fiber reinforced polyester and epoxy rock anchors under shock loading was investigated using a special facility for dynamic tests. Two concrete blocks were connected with the anchor. With a constant acceleration three loading blocks with different weights were used to produce various dynamic forces on the anchor and the grout material. Of special interest were the length of exceeded bond strength in the grout material and the load capacity of the fiber reinforced anchors. The residual resistance of the anchors was tested by push-out tests of specimens to estimate the loss of bond strength and its distribution over the anchor length. The results refer to a realistic scale.
引用
收藏
页码：89 / 95
页数：7
相关论文
共 50 条
  • [41] Some experiences on the effect of re-injection on the load-bearing capacity of anchors in the ground
    Gonzalez, Jose
    Monroy, Rogelio
    Villar, Sergio
    Clavellina, Jose
    Paulin, Juan
    GEOTECHNICAL ENGINEERING IN THE XXI CENTURY: LESSONS LEARNED AND FUTURE CHALLENGES, 2019, : 985 - 993
  • [42] Load application elements integrated in laminated glass and their load-bearing behavior
    Puller, Kerstin
    Sobek, Werner
    Stahlbau, 2012, 81 : 225 - 235
  • [43] INTERFACE BETWEEN BONE AND POLYMETHYLMETHACRYLATE UNDER LOAD-BEARING
    MILLER, J
    BURKE, D
    STACHIEWICZ, JW
    CANADIAN JOURNAL OF SURGERY, 1976, 19 (04) : 334 - 334
  • [44] Calibration of models predicting the load-bearing capacity of bonded anchors using a genetic algorithm
    Barnat, Jan
    Pribyl, Oto
    Vild, Martin
    Smak, Milan
    Rubina, Ales
    Bajer, Miroslav
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2024, 20
  • [45] Load-bearing behaviour of anchors in fibre-reinforced concrete - A state of the art review
    Mansour, Ayman
    Mohyeddin, Alireza
    Lee, Jessey
    JOURNAL OF BUILDING ENGINEERING, 2024, 91
  • [46] Calculation method for the axial load-bearing capacity of steel pipe-to-sleeve grouted connections
    Wu, Liwei
    Guo, Xueyuan
    Chen, Haibin
    Liu, Junyang
    Su, Youpo
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 314
  • [47] Cyclic loading test of precast concrete load-bearing walls designed for gravitational loading
    Pimanmas, Amorn
    Yooprasertchai, Ekkachai
    Wiwatrojanagul, Pongsak
    MAGAZINE OF CONCRETE RESEARCH, 2021, 73 (12) : 595 - 607
  • [48] An analytical model of the load transfer behavior of fully grouted cable bolts
    Chen, Jianhang
    Saydam, Serkan
    Hagan, Paul C.
    CONSTRUCTION AND BUILDING MATERIALS, 2015, 101 : 1006 - 1015
  • [49] Investigation of the buckling and load-bearing behaviour of selectively stitched stiffened CFRP panels under multiaxial loading
    Fernández D.
    Begemann B.
    Middendorf P.
    Horst P.
    CEAS Aeronautical Journal, 2019, 10 (03): : 703 - 717
  • [50] LOAD-BEARING BEHAVIOUR OF ANCHOR FASTENINGS UNDER SHEAR, COMBINED TENSION AND SHEAR OR FLEXURAL LOADING.
    Eligehausen, R.
    Fuchs, W.
    Betonwerk und Fertigteil-Technik/Concrete Precasting Plant and Technology, 1988, 54 (02): : 48 - 56
12345