A COMPRESSION-LOADED DOUBLE CANTILEVER BEAM SPECIMEN

被引：11

作者：

GONZALEZ, AC

PANTANO, CG

机构：

[1] Department of Materials Science and Engineering, The Pennsylvania State University, University Park, Pennsylvania

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 1990年 / 73卷 / 08期

关键词：

crack growth; double cantilever beams; fractography; load; stress;

D O I：

10.1111/j.1151-2916.1990.tb07629.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In crack propagation studies, double cantilever beam specimens are typically loaded in tension or by an applied moment. A method of compression loading is described in which the stress intensity KI decreases with crack length. This new arrangement offers added crack stability over other techniques, as well as a convenient method of loading. Copyright © 1990, Wiley Blackwell. All rights reserved

引用

页码：2534 / 2535

页数：2

共 50 条

[11] Secondary buckling of compression-loaded composite plates
Tiwari, N
Hyer, MW
AIAA JOURNAL, 2002, 40 (10) : 2120 - 2126
[12] FAILURE OF COMPRESSION-LOADED MULTIDIRECTIONAL COMPOSITE LAMINATES
SHUART, MJ
AIAA JOURNAL, 1989, 27 (09) : 1274 - 1279
[13] Failure of compression-loaded multidirectional composite laminates
Shuart, Mark J., 1600, (27):
[14] Effective widths of compression-loaded plates with a cutout
Hilburger, MW
Nemeth, MP
Starnes, JH
COLLECTION OF THE 41ST AIAA/ASME/ASCE/AHS/ASC STRUCTURES, STRUCTURAL DYNAMICS, AND MATERIALS CONFERENCE AND EXHIBIT, VOL 1 PTS 1-3, 2000, : 1586 - 1603
[15] Delamination criticality in slender compression-loaded composite panels
Asp, LE
Nilsson, KF
EXPERIMENTAL TECHNIQUES AND DESIGN IN COMPOSITE MATERIALS 5, 2002, 221-2 : 3 - 15
[16] Fatigue crack growth in double cantilever beam specimen with an adhesive layer
Abou-Hamda, MM
Megahed, MM
Hammouda, MMI
ENGINEERING FRACTURE MECHANICS, 1998, 60 (5-6) : 605 - 614
[17] QUESTION OF DETERMINATION OF THE J-INTEGRAL ON A DOUBLE CANTILEVER BEAM SPECIMEN
KRASOVSKII, AY
ORYNYAK, IV
TOROP, VM
SOVIET MATERIALS SCIENCE, 1987, 23 (02): : 152 - 155
[18] ON THE DOUBLE CANTILEVER BEAM SPECIMEN FOR MODE-I INTERFACE DELAMINATION
BALENDRAN, B
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 1994, 61 (02): : 471 - 473
[19] Elastic-plastic analysis of Asymmetric Double Cantilever Beam specimen
Rizov, Victor
Mladensky, Angel
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 92 : 44 - 51
[20] Fatigue crack growth in double cantilever beam specimen with an adhesive layer
Cairo Univ, Cairo, Egypt
Eng Fract Mech, 5-6 (605-614):

← 1 2 3 4 5 →