Influence of Al5FeSi Phases on the Cracking of Castings at Al-Si Alloys

被引：4
|
作者：
Hren, I [1 ]
Svobodova, J. [1 ]
Michna, S. [1 ]
机构：
[1] Univ JE Purkyne Usti Nad Labem, Fac Mech Engn, Inst Technol & Mat, Pasteurova 7, Usti Nad Labem 40096, Czech Republic
来源：
ARCHIVES OF FOUNDRY ENGINEERING | 2018年 / 18卷 / 04期
关键词：
Aluminium alloy; Intametallic phase; Low pressure casting; Structure; Iron contamination;
D O I：
10.24425/afe.2018.125180
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The research described in this contribution is focused on fractographic analysis of the fracture area of newly developed eutectic silumin type AlSi9NiCuMg0.5 (AA 4032), which was developed and patented by a team of staff of the Faculty of Mechanical Engineering. The paper presents determination of the cause of casting cracks in operating conditions. Fractographic analysis of the fracture area, identification of the structure of the casting, identification of structural components on the surface of the fracture surface and chemical analysis of the material in the area of refraction were performed within the experiment. Al-Si alloys with high specific strength, low density, and good castability are widely used in pressure-molded components for the automotive and aerospace industries. The results shown that the inter-media phases Fe-Al and Fe-Si in aluminium alloys lead to breakage across the entire casting section and a crack that crossed the entire cross section, which was confirmed by EDS analysis.
引用
收藏
页码：120 / 124
页数：5
相关论文
共 50 条
  • [1] Morphology of β-Al5FeSi phase in Al-Si cast alloys
    Cao, Xinjin
    Campbell, John
    MATERIALS TRANSACTIONS, 2006, 47 (05) : 1303 - 1312
  • [2] Precipitation of β-Al5FeSi Phase Platelets in Al-Si Based Casting Alloys
    Liu, L.
    Mohamed, A. M. A.
    Samuel, A. M.
    Samuel, F. H.
    Doty, H. W.
    Valtierra, S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (10): : 2457 - 2469
  • [3] Precipitation of β-Al5FeSi Phase Platelets in Al-Si Based Casting Alloys
    L. Liu
    A.M.A. Mohamed
    A.M. Samuel
    F.H. Samuel
    H.W. Doty
    S. Valtierra
    Metallurgical and Materials Transactions A, 2009, 40 : 2457 - 2469
  • [4] Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al5FeSi in Hypoeutectic Al-Si Foundry Alloys
    Y.H. Cho
    H.-C. Lee
    K.H. Oh
    A.K. Dahle
    Metallurgical and Materials Transactions A, 2008, 39 : 2435 - 2448
  • [5] Effect of strontium and phosphorus on eutectic Al-Si nucleation and formation of β-Al5FeSi in hypoeutectic Al-Si foundry alloys
    Cho, Y. H.
    Lee, H. -C.
    Oh, K. H.
    Dahle, A. K.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (10): : 2435 - 2448
  • [6] Effect of iron content on the formation of β-Al5FeSi and porosity in Al-Si eutectic alloys
    Moustafa, M. A.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (01) : 605 - 610
  • [7] Discussion of “Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al5FeSi in Hypoeutectic Al-Si Foundry Alloys”*
    John Campbell
    Metallurgical and Materials Transactions A, 2009, 40 : 1009 - 1010
  • [8] Discussion of "Effect of Strontium and Phosphorus on Eutectic Al-Si Nucleation and Formation of β-Al5FeSi in Hypoeutectic Al-Si Foundry Alloys"*
    Campbell, John
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (05): : 1009 - 1010
  • [9] Effect of oxide type and Mg content on the precipitation of β-Al5FeSi phase in superheated Al-Si die casting alloys
    Samuel, AM
    Samuel, FH
    Doty, HW
    Valtierra, S
    LIGHT METALS 2000 METAUX LEGERS, PROCEEDINGS, 2000, : 103 - 121
  • [10] EFFECT OF β-AL5FESI AND π-AL8MG3FESI6 PHASES ON THE IMPACT TOUGHNESS AND FRACTOGRAPHY OF AL-SI-MG-BASED ALLOYS
    Elsharkawi, E. A.
    Abdelaziz, M. H.
    Samuel, F. H.
    Doty, H. W.
    Valtierra, S.
    INTERNATIONAL JOURNAL OF METALCASTING, 2018, 12 (01) : 148 - 163
12345