COMPLETE BALANCING OF THE INERTIA INPUT TORQUE FOR PLANAR MECHANISMS

被引：5

作者：

FUNK, W ^{[1
]}

HAN, JY ^{[1
]}

机构：

[1] YANSHAN UNIV,DEPT MECH ENGN 2,QINHUANGDAO,PEOPLES R CHINA

来源：

ARCHIVE OF APPLIED MECHANICS | 1993年 / 63卷 / 4-5期

关键词：

D O I：

10.1007/BF00793901

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

This paper presents a new method for complete balancing inertia input torque. This method transforms the balancing problem into a profile curve synthesis problem of a planar groove cam. The method is simple and convenient to be used. The planer four-bar linkage and the six-bar linkage are cited as two examples. The fluctuating torques in the driving shafts caused by the inertia forces have been completely balanced.

引用

页码：353 / 360

页数：8

共 50 条

[41] AN EFFICIENT METHOD TO FIND THE DYNAMIC BALANCING CONDITIONS OF MECHANISMS: PLANAR SYSTEMS
Acevedo, Mario
INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 5B, 2016,
[42] General theory of complete shaking moment balancing of planar linkages: a critical review
Kochev, IS
MECHANISM AND MACHINE THEORY, 2000, 35 (11) : 1501 - 1514
[43] Complete balancing of the shaking moment in spatial linkages by adding planar noncircular gears
Han, JY
ARCHIVE OF APPLIED MECHANICS, 1996, 67 (1-2) : 44 - 49
[44] Comparative Analysis for Low-Mass and Low-Inertia Dynamic Balancing of Mechanisms
van der Wijk, V.
Demeulenaere, B.
Gosselin, C.
Herder, J. L.
JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME, 2012, 4 (03):
[45] Adaptive tracking of angular velocity for a planar rigid body with unknown models for inertia and input nonlinearity
Chaturvedi, Nalin A.
Sanyal, Amit K.
Chellappa, Madhusudhan
Valk, Jean Luc
McClamroch, N. Harris
Bernstein, Dennis S.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2006, 14 (04) : 613 - 627
[46] Input torque balancing using a cam-based centrifugal pendulum: design procedure and example
Demeulenaere, B
Spaepen, P
De Schutter, J
JOURNAL OF SOUND AND VIBRATION, 2005, 283 (1-2) : 1 - 20
[47] Input torque balancing using a cam-based centrifugal pendulum: design optimization and robustness
Demeulenaere, B
Spaepen, P
De Schutter, J
JOURNAL OF SOUND AND VIBRATION, 2005, 283 (1-2) : 21 - 46
[48] GENERAL-METHOD FOR ACTIVE BALANCING OF COMBINED SHAKING MOMENT AND TORQUE FLUCTUATIONS IN PLANAR LINKAGES
KOCHEV, IS
MECHANISM AND MACHINE THEORY, 1990, 25 (06) : 679 - 687
[49] ASSEMBLING COMPLETE POLE CONFIGURATIONS FOR (OVER)CONSTRAINED PLANAR MECHANISMS
DIJKSMAN, EA
JOURNAL OF MECHANICAL DESIGN, 1994, 116 (01) : 215 - 225
[50] An IPMSM Torque/Weight and Torque/Moment of Inertia Ratio Optimization
Caruso, M.
Di Tommaso, A. O.
Miceli, R.
Ognibene, P.
Galluzzo, G. Ricco
2014 INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS, ELECTRICAL DRIVES, AUTOMATION AND MOTION (SPEEDAM), 2014, : 31 - 36

← 1 2 3 4 5 →