Preparation of conductive EPDM rubber sheets by electroless Ni-plating for electromagnetic interference shielding applications

被引：0

作者：

Lee, Byeong Woo ^{[1
]}

Cho, Soo Jin ^{[1
]}

Yang, Jun Seok ^{[1
]}

机构：

[1] Korea Maritime Univ, Dept Marine Equipments Engn, Busan 49112, South Korea

来源：

JOURNAL OF THE KOREAN CRYSTAL GROWTH AND CRYSTAL TECHNOLOGY | 2015年 / 25卷 / 05期

关键词：

Electroless plating; Ni plating; EPDM rubber; MCT; EMI shielding;

D O I：

10.6111/JKCGCT.2015.25.5.193

中图分类号：

O7 [晶体学];

学科分类号：

0702 ; 070205 ; 0703 ; 080501 ;

摘要：

In the study, electroless Ni-plating on flexible ethylene-propylene-diene-monomer (EPDM) rubber sheets for the application of an insert block for shielding electromagnetic interference of multi cable transit (MCT) systems was investigated. Ni crystallinity and adhesion have been found to vary with processing parameters such as pH and temperature of the plating bath. It was shown that Ni-films having the high crystallinity and optimum electric conductivity were obtained on EPDM rubber sheets under pH 7 and 8 at 60 similar to 70 degrees C. The conductive Ni-plated EPDM rubber prepared at pH 7 at 70 degrees C showed the enhanced adhesion and electric conductivity, and the high electromagnetic interference shielding effect in the 400 MHz similar to 1 GHz range.

引用

页码：193 / 198

页数：6

共 50 条

[31] Highly Conductive Ag/pCF/MVQ Composite Rubber for Efficient Electromagnetic Interference Shielding
Chen, Yang
Shao, Xiao-Ming
He, Liang
Xu, Yi-Nuo
Yao, Qi-Yuan
Feng, Ding
Wang, Wen-Cai
CHINESE JOURNAL OF POLYMER SCIENCE, 2024, 42 (06) : 864 - 873
[32] Highly Conductive Ag/pCF/MVQ Composite Rubber for Efficient Electromagnetic Interference Shielding
Yang Chen
Xiao-Ming Shao
Liang He
Yi-Nuo Xu
Qi-Yuan Yao
Ding Feng
Wen-Cai Wang
Chinese Journal of Polymer Science, 2024, 42 : 864 - 873
[33] Preparation and Kinetics of wood-based Ni-P Coating Electromagnetic Shielding Material by Ytterbium-Improved Electroless Plating
Jiang, Boquan
Liu, Yude
Zeng, Jiangnan
Zhang, Wenlong
ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 404 - 408
[34] Microstructure and electromagnetic interference shielding effectiveness of electroless Ni-P plated polyester fabric
Guo, R. H.
Jiang, S. Q.
Yuen, C. W. M.
Ng, M. C. F.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2009, 20 (08) : 735 - 740
[35] Silver electroless plating on aminated graphene oxide-based cotton fabric for electromagnetic interference shielding and bioactivity
Akram, Saba
Javid, Amjed
Ashraf, Munir
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 2023, 288
[36] Preparation and electromagnetic interference shielding properties of electroless iron-nickel plated carbon fiber
Zhou, Rui
Yu, Kejing
Xu, Yang
Huagong Jinzhan/Chemical Industry and Engineering Progress, 2024, 43 (07): : 3955 - 3963
[37] Preparation and properties of electromagnetic interference shielding poly(ethylene terephthalate) fabrics by the electroless deposition method
Key Laboratory of Beijing Municipality for Preparation and Processing of Novel Polymer Materials, Beijing University of Chemical Technology, Beijing 100029, China
不详
Beijing Huagong Daxue Xuebao, 2007, 3 (275-278):
[38] Nanocellulose-based conductive composites: A review of systems for electromagnetic interference shielding applications
Orasugh, Jonathan Tersur
Temane, Lesego Tabea
Ray, Suprakas Sinha
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 2024, 277
[39] Comparative study of electroless Co-Ni-P plating on Tencel fabric by Co0-based and Ni0-based activation for electromagnetic interference shielding
Bi, Siyi
Zhao, Hang
Hou, Lei
Lu, Yinxiang
APPLIED SURFACE SCIENCE, 2017, 419 : 465 - 475
[40] Multilayer-Structured Wood Electroless Cu-Ni Composite Coatings for Electromagnetic Interference Shielding
Pan, Yanfei
Yin, Dingwen
Yu, Xiaofang
Hao, Nanyi
Huang, Jintian
COATINGS, 2020, 10 (08)

← 1 2 3 4 5 →