Optimization of the geometrical parameters of bonded composite wrap for repairing cracked pipelines

被引：10
|
作者：
Medjdoub, Sidi Mohamed [1 ]
Bouadjra, Belabbes Bachir [2 ]
Abdelkader, Miloudi [3 ]
机构：
[1] Univ Djillali Liabes Sidi Bel Abbes, Sidi Bel Abbes, Algeria
[2] Univ Djillali Liabes Sidi Bel Abbes, LPMM Lab, Sidi Bel Abbes, Algeria
[3] Univ Djillali Liabes Sidi Bel Abbes, LMSR Lab, Sidi Bel Abbes, Algeria
来源：
FRATTURA ED INTEGRITA STRUTTURALE | 2018年 / 12卷 / 46期
关键词：
Fracture mechanics; Crack; Composite; Wrap; Pipelines;
D O I：
10.3221/IGF-ESIS.46.11
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study the finite element method is used to analyze the performances of bonded composite wrap repair of cracked steel pipelines. Parametric analysis was performed in order to highlight the effects of the geometrical properties on the repair efficiency. The experimental design method is used to explore the effects of wrap dimensions (length, angle and thickness) in order to optimize the repair process. We showed in using the MOODE. 5 software the most dominant geometrical parameters on stress intensity factor at the crack front which to determine the most important parameters on the repair efficiency. This optimization can help the composite wrap designers to improve the repair performance and rehabilitation.
引用
收藏
页码：102 / 112
页数：11
相关论文
共 50 条
  • [21] Optimization of Machining and Geometrical Parameters to Reduce Vibration While Milling Metal Matrix Composite
    Rajeswari Sridhar
    Sivasakthivel Perumal Subramaniyan
    S. Ramesh
    Transactions of the Indian Institute of Metals, 2019, 72 : 3179 - 3189
  • [22] Optimization of Machining and Geometrical Parameters to Reduce Vibration While Milling Metal Matrix Composite
    Sridhar, Rajeswari
    Subramaniyan, Sivasakthivel Perumal
    Ramesh, S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (12) : 3179 - 3189
  • [23] Optimization of Geometrical Parameters of Magnetic Sensor
    Shirokov, Igor
    Redkina, Elena
    2017 IEEE SENSORS APPLICATIONS SYMPOSIUM (SAS), 2017,
  • [24] Influence of bonded repairing composite plates on the failure forms for each layer
    Zhang, Xiaochuang
    Li, Cheng
    Tie, Ying
    Chang, Liping
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2013, 49 (10): : 84 - 89
  • [25] Method for determining process parameters in the repairing of pipelines with out-of-spec curvature
    Varshitsky, Victor M.
    Lebedenko, Igor B.
    Figarov, Eldar N.
    NAUKA I TEHNOLOGII TRUBOPROVODNOGO TRANSPORTA NEFTI I NEFTEPRODUKTOV-SCIENCE & TECHNOLOGIES-OIL AND OIL PRODUCTS PIPELINE TRANSPORTATION, 2020, 10 (01): : 17 - 21
  • [26] The effects of geometrical dimensions on the failure of composite-to-composite adhesively bonded joints
    Qin, Zhiwen
    Yang, Ke
    Wang, Jihui
    Zhang, Lixin
    Huang, Ji
    Peng, Haijun
    Xu, Jianzhong
    JOURNAL OF ADHESION, 2021, 97 (11): : 1024 - 1051
  • [27] Stress Intensity Factor for Repaired Circumferential Cracks in Pipe With Bonded Composite Wrap
    Benyahia, F.
    Albedah, A.
    Bouiadjra, B. Bachir
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (04):
  • [28] Numerical analysis of repaired wall loss defect pipelines for optimum composite wrap thickness
    Khaisem, M.
    Budhe, S.
    de Barros, S.
    Banea, M. D.
    Rohem, N. R. F.
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2023, (63): : 153 - 168
  • [29] Nonlinear analysis of bonded composite patch repair of cracked aluminum panels
    Naboulsi, S
    Mall, S
    COMPOSITE STRUCTURES, 1998, 41 (3-4) : 303 - 313
  • [30] Elastic plastic analysis of bonded composite repair in cracked aircraft structures
    Albedah, A.
    Bouiadjra, B. Bachir
    Ouddad, W.
    Es-saheb, M.
    Binyahia, F.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (01) : 66 - 72
12345