DIRECT LIQUID INJECTION MOCVD OF HIGH-QUALITY PLZT FILMS

被引:28
|
作者
TAO, W
DESU, SB
LI, TK
机构
[1] Department of Materials Science and Engineering, Virginia Polytechnic Institute, State University, Blacksburg
关键词
D O I
10.1016/0167-577X(95)00032-1
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
High quality lanthanum-modified lead zirconate titanate (PLZT) films have been deposited on (111) Pt/Ti/SiO2/Si substrates by direct liquid injection (DLI) metal-organic chemical vapor deposition (MOCVD). The as-deposited PLZT films have smooth, reflective surfaces which were characterized by scanning electron microscopy and variable angle spectroscopic ellipsometry. X-ray diffraction (XRD) measurements indicated that single perovskite phase with a-axis oriented PLZT films were formed in situ at a substrate temperature of 650 degrees C. Typical P-E hysteresis loop exhibits remanent polarization as high as 2P(r)=48.1 mu C/cm(2). The coercive field is 2E(c)=98 kV/cm. Electrical fatigue tests show 70% of the original switched polarization remained after 1 x 10(10) cycles.
引用
收藏
页码:177 / 180
页数:4
相关论文
共 50 条
  • [1] Perovskite thin films grown by direct liquid injection MOCVD
    Andrieux, M.
    Gasqueres, C.
    Legros, C.
    Gallet, I.
    Herbst-Ghysel, M.
    Condat, M.
    Kessler, V. G.
    Seisenbaeva, G. A.
    Heintz, O.
    Poissonnet, S.
    APPLIED SURFACE SCIENCE, 2007, 253 (23) : 9091 - 9098
  • [2] Synthesis of High-Quality Monolayer MoS2 by Direct Liquid Injection
    McCreary, Kathleen M.
    Cobas, Enrique D.
    Hanbicki, Aubrey T.
    Rosenberger, Matthew R.
    Chuang, Hsun-Jen
    Sivaram, Saujan, V
    Oleshko, Vladimir P.
    Jonker, Berend T.
    ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (08) : 9580 - 9588
  • [3] HIGH-QUALITY FILMS OF GAAS ON SILICON ON INSULATOR GROWN BY MOCVD
    VERNON, S
    HAVEN, V
    BUNKER, S
    ABERNATHY, CR
    CARUSO, R
    SHORT, KT
    CHU, SNG
    BROWN, JM
    PEARTON, SJ
    JOURNAL OF ELECTRONIC MATERIALS, 1987, 16 (04) : A26 - A26
  • [4] Direct growth of high-quality InP layers on GaAs substrates by MOCVD
    Yarn, K.F.
    Chien, W.C.
    Lin, C.L.
    Liao, C.I.
    Active and Passive Electronic Components, 2003, 26 (02) : 71 - 79
  • [5] Deposition of high-k dielectric oxide films by liquid injection MOCVD
    Jones, AC
    Williams, PA
    Chalker, PR
    Taylor, S
    Zoolfakr, A
    Smith, LM
    McGraw, P
    INTEGRATED FERROELECTRICS, 2003, 57 : 1271 - 1277
  • [6] Preparation of High Permittivity GdScO3 Films by Liquid Injection MOCVD
    Husekova, K.
    Jurkovic, M.
    Cico, K.
    Machajdik, D.
    Dobrocka, E.
    Luptak, R.
    Mackova, A.
    Froehlich, K.
    EUROCVD 17 / CVD 17, 2009, 25 (08): : 1061 - 1064
  • [7] MOCVD of ferroelectric PLZT thin films and their properties
    Shimizu, M
    Fujisawa, H
    Shiosaki, T
    MICROELECTRONIC ENGINEERING, 1995, 29 (1-4) : 173 - 176
  • [8] MOCVD growth of high-quality InN films and Raman characterization of residual stress effects
    Kurimoto, E
    Harima, H
    Hashimoto, A
    Yamamoto, A
    PHYSICA STATUS SOLIDI B-BASIC RESEARCH, 2001, 228 (01): : 1 - 4
  • [9] MOCVD of zirconia thin films by direct liquid injection using a new class of zirconium precursor
    Jones, AC
    Leedham, TJ
    Wright, PJ
    Crosbie, MJ
    Lane, PA
    Williams, DJ
    Fleeting, KA
    Otway, DJ
    O'Brien, P
    CHEMICAL VAPOR DEPOSITION, 1998, 4 (02) : 46 - +
  • [10] High-quality langasite films grown by liquid phase epitaxy
    Klemenz, C
    JOURNAL OF CRYSTAL GROWTH, 2002, 237 : 714 - 719