EFFECT OF LOADING RATE ON FRACTURE-TOUGHNESS OF BONDED JOINTS

被引：3

作者：

KHALIL, AA ^{[1
]}

BAYOUMI, MR ^{[1
]}

机构：

[1] KING ABDULAZIZ UNIV,DEPT MECH ENGN,JEDDAH,SAUDI ARABIA

来源：

ENGINEERING FRACTURE MECHANICS | 1991年 / 39卷 / 06期

关键词：

D O I：

10.1016/0013-7944(91)90110-M

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Feasibility studies in using adhesive bonding to replace conventional fastening methods have been proved successful. At this stage it is essential to furnish the designer with the data required for such type of fabrication. One of the main factors affecting the bonded joint strength is the loading rate. Therefore, the objective of this study is to investigate the role of loading rate on fracture toughness of bonded joints. Cleavage strength tests were carried out at different loading rates using epoxy resin as an adhesive material and two adherend materials, namely aluminium and brass. Tests were carried out to cover seven different loading rates. The results indicate a significant role of the strain rate on the fracture strength.

引用

页码：1037 / 1043

页数：7

共 50 条

[21] METHOD OF FRACTURE-TOUGHNESS EVALUATION OF ADHESIVE JOINTS
CHOW, CL
NGAN, KM
[J]. JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1980, 15 (02): : 97 - 101
[22] Loading rate effect on interlaminar fracture toughness
Li, Yulong
Liu, Huifang
[J]. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2015, 36 (08): : 2620 - 2650
[23] FRACTURE-TOUGHNESS OF ADHESIVE JOINTS .2. TEMPERATURE AND RATE DEPENDENCIES OF MODE-I FRACTURE-TOUGHNESS AND ADHESIVE TENSILE-STRENGTH
LIM, WW
MIZUMACHI, H
[J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1995, 57 (01) : 55 - 61
[24] THE EVALUATION OF DYNAMIC FRACTURE-TOUGHNESS AT IMPACT LOADING
BUCHAR, J
BILEK, Z
DUSEK, F
MAZANEC, K
[J]. KOVOVE MATERIALY-METALLIC MATERIALS, 1982, 20 (05): : 586 - 600
[25] THE FRACTURE-TOUGHNESS OF CONCRETE UNDER IMPACT LOADING
MINDESS, S
BANTHIA, N
YAN, C
[J]. CEMENT AND CONCRETE RESEARCH, 1987, 17 (02) : 231 - 241
[26] CORRELATION OF FRACTURE-TOUGHNESS OF BONDED JOINTS WITH QUALITY (ROUGHNESS) OF KNIFE-PLANED MDF SURFACES
TRIBOULOT, P
SALES, C
ZERIZER, A
MARTIN, P
[J]. HOLZFORSCHUNG, 1995, 49 (05) : 465 - 470
[27] STUDY OF THE VARIATION OF FRACTURE-TOUGHNESS WITH LOADING RATE USING COMPACT TENSION SPECIMENS
BASSIM, MN
BAYOUMI, MR
SHUM, D
[J]. ENGINEERING FRACTURE MECHANICS, 1987, 26 (04) : 619 - 623
[28] LOADING RATE DEPENDENCE ON FRACTURE-TOUGHNESS AND MICROFRACTURE MECHANISMS OF TIAL WITH LAMELLAR STRUCTURE
ENOKI, M
FUJIKAWA, S
KISHI, T
[J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1994, 58 (04) : 424 - 429
[29] THE EFFECT OF PRESTRAIN ON FRACTURE-TOUGHNESS
MILLIGAN, RV
[J]. EXPERIMENTAL MECHANICS, 1982, 22 (05) : N36 - N36
[30] Interfacial fracture toughness of adhesively bonded joints
Alfano, Marco
Furgiuele, Franco
Maletta, Carmine
[J]. FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 149 - +

← 1 2 3 4 5 →