Elastic-Plastic Analysis Under Proportional and Non-Proportional Loading Paths Using Deformation Plasticity Theory

An estimation of elastic-plastic stresses and strains is presented for mechanical components, using pseudo elastic analysis based on the deformation theory of plasticity. Analysis of two applications, one under proportional loading and other under non-proportional loading paths using pseudo elastic finite element method, is presented. A rectangular plate with a hole under tension loading and a rectangular plate fixed at one end under bending-tension non-proportional loading are considered for analysis. Pseudo Elastic finite element analysis for proportional loading uses elastic solutions and varies material properties for elements in plastic zone to estimate elastic-plastic solution. A finite element code is developed based on pseudo elastic analysis method. An attempt is made to extend pseudo elastic analysis to analyze bending-tension non-proportional loading problem. Both applications in consideration are assumed to be of Von Mises material and follow isotropic hardening rule with elastic-linear hardening material model. Non-linear analysis of the plate with a hole under proportional tensile loading and that of rectangular plate under bending-tension non-proportional loading are performed in ANSYS and results are compared for validation and are observed to be in good agreement with present analysis.