THE CHARACTERISTICS AND EVALUATION METHOD OF BONDING STRENGTH ON ROLLED STAINLESS CLAD STEEL

被引：0
|
作者：
FUKUDA, T
IWADATE, T
机构：
来源：
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 1990年 / 76卷 / 08期
关键词：
D O I：
10.2355/tetsutohagane1955.76.8_1293
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The characteristics of bonding strength of hot rolled stainless clad steel were investigated in conjunction with the microstructures and fracture toughness of the bonding interface and the effect of specimen size on bonding strength. The bonding ratio is the most important parameter for evaluation of the bonding interface. The bonding strength and fracture toughness decrease and crack propagation rate increases with decrease of bonding ratio, which results in higher possibility to debond at the interface with T joint welds. The shear and ram tensile strengths insufficiently reflect the characteristics of bonding interface and are affected by the size of test specimen. The fracture toughness and crack propagation rate of the bonding interface change with the strength of clad stainless steel, and residual stress remained in the interface.
引用
收藏
页码：1293 / 1300
页数：8
相关论文
共 50 条
  • [21] Microstructure and Interface Fracture Characteristics of Hot-Rolled Stainless Steel Clad Plates by Adding Different Interlayers
    Wang, Shuai
    Liu, BaoXi
    Zhang, Xin
    Chen, CuiXin
    Fang, Wei
    Ji, PuGuang
    Feng, JianHang
    Jiang, YanFei
    Yin, FuXing
    STEEL RESEARCH INTERNATIONAL, 2020, 91 (04)
  • [22] Experimental study on hot rolled stainless steel clad plate produced by TMCP
    Li, Long
    Zhu, Zhi-Chao
    Zhang, Xin-Jin
    Liu, Hui-Yun
    Cailiao Gongcheng/Journal of Materials Engineering, 2015, 43 (07): : 62 - 67
  • [23] Effect of Annealing Temperature on the Interfacial Microstructure and Bonding Strength of Cu/Al Clad Sheets with a Stainless Steel Interlayer
    Gao, Haitao
    Gu, Hao
    Wang, Sai
    Xuan, Yanni
    Yu, Hailiang
    MATERIALS, 2022, 15 (06)
  • [24] Effects of a stainless steel interlayer on the interfacial microstructure and bonding strength of Cu/Al clad sheets prepared via the powder-in-tube method
    Gao, Haitao
    Wang, Lin
    Liu, Shilei
    Li, Jing
    Kong, Charlie
    Yu, Hailiang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2021, 15 (15): : 3514 - 3524
  • [25] Research on high-cycle fatigue properties of hot rolled titanium-clad bimetallic steel with low bonding strength
    Huang C.
    Ban H.
    Hai L.
    Jiang J.
    Shi Y.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2022, 43 (05): : 36 - 43
  • [26] DEVELOPMENT OF ROLLED TITANIUM CLAD STEEL .3. PROPERTIES OF ROLLED TITANIUM CLAD STEEL PLATES
    NAKAMURA, T
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1655 - 1655
  • [27] Process Analysis and Trial Tests for Hot-Rolled Stainless Steel/Carbon Steel Clad Plates
    Z. Y. Chen
    J. X. Li
    Z. G. Lin
    J. J. Qi
    L. Sun
    G. D. Wang
    Strength of Materials, 2019, 51 : 26 - 31
  • [28] Microstructure, mechanical properties and interface bonding mechanism of hot-rolled stainless steel clad plates at different rolling reduction ratios
    Wang, S.
    Liu, B. X.
    Chen, C. X.
    Feng, J. H.
    Yin, F. X.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 766 : 517 - 526
  • [29] PROCESS ANALYSIS AND TRIAL TESTS FOR HOT-ROLLED STAINLESS STEEL/CARBON STEEL CLAD PLATES
    Chen, Z. Y.
    Li, J. X.
    Lin, Z. G.
    Qi, J. J.
    Sun, L.
    Wang, G. D.
    STRENGTH OF MATERIALS, 2019, 51 (01) : 26 - 31
  • [30] Effect of Surface Roughness on Interface Quality of Hot Rolled Stainless Steel Clad Plate
    Jin H.
    Zhang Z.
    Han M.
    Jing S.
    Zhao D.
    Jin, Herong (ysujhr@ysu.edu.cn), 1600, Cailiao Daobaoshe/ Materials Review (35): : 8151 - 8156
12345