Experimental Design and Data collection of a finishing end milling operation of AISI 1045 steel

被引：1

作者：

Dias Lopes, Luiz Gustavo ^{[1
]}

de Brito, Tarcisio Goncalves ^{[2
]}

de Paiva, Anderson Paulo ^{[2
]}

Peruchi, Rogerio Santana ^{[2
]}

Balestrassi, Pedro Paulo ^{[2
]}

机构：

[1] FEPI Univ Ctr Itajuba, Itajuba, Brazil

[2] UNIFEI Fed Univ Itajuba, Itajuba, Brazil

来源：

DATA IN BRIEF | 2016年 / 6卷

关键词：

D O I：

10.1016/j.dib.2016.01.012

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

In this Data in Brief paper, a central composite experimental design was planned to collect the surface roughness of an end milling operation of AISI 1045 steel. The surface roughness values are supposed to suffer some kind of variation due to the action of several factors. The main objective here was to present a multivariate experimental design and data collection including control factors, noise factors, and two correlated responses, capable of achieving a reduced surface roughness with minimal variance. Lopes et al. (2016) [1], for example, explores the influence of noise factors on the process performance. (C) 2016 Published by Elsevier Inc.

引用

页码：609 / 613

页数：5

共 50 条

[21] Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel
Mohamed Shnfir
J. Kouam
V. Songmene
The International Journal of Advanced Manufacturing Technology, 2020, 110 : 617 - 627
[22] Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel
Shnfir, Mohamed
Kouam, J.
Songmene, V.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 110 (3-4): : 617 - 627
[23] Microlubrication Effects During End Milling AISI 1018 Steel
Shaikh, Vasim
Boubekri, Nourredine
Scharf, Thomas W.
INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2013, 3 (04) : 14 - 29
[24] Minimization of Milling-Induced Residual Stresses in AISI 1045 Steel: Process Optimization using Design of Experiments Taguchi Method
Durakovic, Benjamin
Marimuthu, K. Prakash
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (15) : 7721 - 7727
[25] Prediction of cutting force in end-milling operation of modified AISI P20 tool steel
Abou-El-Hossein, K. A.
Kadirgama, K.
Hamdi, M.
Benyounis, K. Y.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 182 (1-3) : 241 - 247
[26] Performance of surface-textured end-mill insert on AISI 1045 steel
Arumugaprabu, Veerasimman
Ko, Tae Jo
Kumaran, Sundaresan Thirumalai
Kurniawan, Rendi
Kwak, Yein
Yu, Zhen
Uthayakumar, Marimuthu
MATERIALS AND MANUFACTURING PROCESSES, 2019, 34 (01) : 18 - 29
[27] Experimental investigations and multi-objective optimization of MQL-assisted milling process for finishing of AISI 4340 steel
Muaz, Muhammed
Choudhury, Sounak Kumar
MEASUREMENT, 2019, 138 : 557 - 569
[28] An experimental study of flank wear in the end milling of AISI 316 stainless steel with coated carbide inserts
Odedeyi, P. B.
Abou-El-Hossein, K.
Liman, M.
6TH INTERNATIONAL CONFERENCE ON FRACTURE FATIGUE AND WEAR (FFW), 2017, 843
[29] Experimental investigation to study the performance of cryogenic cooling in end milling of AISI P20 steel
Ravi, S.
Gurusamy, P.
MATERIALS TODAY-PROCEEDINGS, 2021, 37 : 2170 - 2173
[30] Influence of quenching and tempering heat treatment on heat flux to the workpiece in dry milling of AISI 1045 steel
Ramos, Nicolas Pinheiro
Antunes, Mariana de Melo
da Silva, Antonio Augusto Araujo Pinto
Guimaraes, Gilmar
de Lima e Silva, Sandro Metrevelle Marcondes
CASE STUDIES IN THERMAL ENGINEERING, 2024, 64

← 1 2 3 4 5 →