Crack Analysis Of A Gasoline Engine Crankshaft

被引：0
|
作者：
Keskin, Ali [1 ]
Aydin, Kadir [2 ]
机构：
[1] Mersin Univ, Tarsus Tech Educ Fac, TR-33480 Tarsus Mersin, Turkey
[2] Cukurova Univ, Fac Engn & Architecture, Dept Mech Engn, TR-01330 Adana, Turkey
来源：
GAZI UNIVERSITY JOURNAL OF SCIENCE | 2010年 / 23卷 / 04期
关键词：
Crankshaft failure; Cracks; Thermal fatigue; Automotive failures;
D O I：
暂无
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
In this study, failure analysis of a crankshaft was carried out. The crankshaft made of nodular graphite cast iron was used in a gasoline engine. The cracks propagated axially on surface of the 4th pin journal. Microscopic observation was conducted on the surface of journals. Mechanical and metallurgical properties of the crankshaft including chemical composition, micro-hardness, tensile properties and roughness were studied and compared with the specified properties of the crankshaft materials. As a result of the analyses, the main reason of failure was determined as thermal fatigue because of contact of journal and bearing surface. This condition leads to the formation and growth of fatigue cracks. The contact is probably resulted from defective lubrication or high operating oil temperature. In addition, the contact caused scratches on surface of the 4th pin journal and 5th main journal.
引用
收藏
页码：487 / 492
页数：6
相关论文
共 50 条
  • [21] Analysis of fatigue crack growth in cylinder head bolts of gasoline engine based on experimental data
    Aliakbari, Karim
    Mamaghani, Tohid Akbarpour
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2020, 42 (05)
  • [22] FAILURE ANALYSIS OF 48MnV ENGINE CRANKSHAFT
    Liu, R.B.
    Jiao, A.Y.
    Chen, S.
    Lu, E.Y.
    Metalurgija, 2025, 64 (1-2): : 101 - 103
  • [23] Orderly dismantling of engine crankshaft and the analysis of assessment of remanufacturability
    Zhan, Dazhi
    Fan, Bailin
    Li, Wulong
    Wang, Yanjun
    Energy Education Science and Technology Part A: Energy Science and Research, 2014, 32 (03): : 1647 - 1656
  • [24] Finite Element Analysis of Marine Diesel Engine Crankshaft
    Zheng, Bin
    Liu, Yongqi
    Liu, Ruixiang
    Meng, Jian
    ADVANCES IN COMPUTER SCIENCE, INTELLIGENT SYSTEM AND ENVIRONMENT, VOL 1, 2011, 104 : 683 - 687
  • [25] Finite element analysis of a vehicle diesel engine crankshaft
    Shandongjianzhu University, School of Mechanical and Electronic Engineering, Jinan, China
    J. Phys. Conf. Ser., 2020, 1
  • [26] Finite element analysis for engine crankshaft torsional stiffness
    Fan R.-L.
    Zhang C.-Y.
    Yin F.
    Feng C.-C.
    Ma Z.-D.
    Gong H.-B.
    International Journal of Simulation and Process Modelling, 2019, 14 (04) : 389 - 396
  • [27] CAUSE ANALYSIS OF CRACKS IN DIESEL ENGINE CRANKSHAFT BLANK
    Liu, S. M.
    Liu, G. J.
    METALURGIJA, 2021, 60 (1-2): : 156 - 158
  • [28] Analysis of rubber strain of torsion damper for engine crankshaft
    Yu, Xue-Hua
    Zhongguo Gonglu Xuebao/China Journal of Highway and Transport, 2008, 21 (03): : 121 - 126
  • [29] Finite element analysis of marine diesel engine crankshaft
    Zheng B.
    Liu Y.
    Liu R.
    Meng J.
    Advances in Intelligent and Soft Computing, 2011, 104 : 683 - 687
  • [30] Dynamic Simulation Analysis of a Diesel Engine Crankshaft System
    Wang, Yubing
    Li, Weiwei
    Zhang, Zhaoyi
    Liu, Feng
    2017 4TH INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND TECHNOLOGY FOR MANUFACTURING GROWTH (METMG 2017), 2017, : 29 - 34
12345