RESIDUAL STRESS STATE IN SINGLE-EDGE NOTCHED TENSION SPECIMEN CAUSED BY THE LOCAL COMPRESSION TECHNIQUE

被引：1

作者：

Huang, Yifan ^{[1
]}

Zhou, Wenxing ^{[2
]}

机构：

[1] Carleton Univ, Dept Civil & Environm Engn, Ottawa, ON, Canada

[2] Univ Western Ontario, Dept Civil & Environm Engn, London, ON, Canada

来源：

ARCHIVE OF MECHANICAL ENGINEERING | 2016年 / 63卷 / 04期

基金：

加拿大自然科学与工程研究理事会;

关键词：

Residual stress; single-edge notched tension specimen; local compression; finite element analysis;

D O I：

10.1515/meceng-2016-0036

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Three-dimensional (3D) finite element analyses (FEA) are performed to simulate the local compression (LC) technique on the clamped single-edge notched tension (SE(T)) specimens. The analysis includes three types of indenters, which are single pair of cylinder indenters (SPCI), double pairs of cylinder indenters (DPCI) and single pair of ring indenters (SPRI). The distribution of the residual stress in the crack opening direction in the uncracked ligament of the specimen is evaluated. The outcome of this study can facilitate the use of LC technique on SE(T) specimens.

引用

页码：635 / 645

页数：11

共 50 条

[1] Practical stress solutions for single-edge V-notched tension specimen
Huang, Yifan
Rajapakse, R. K. N. D.
[J]. THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 102 : 193 - 209
[2] Approximate analysis of DSIF of single-edge notched specimen
Luo, JR
Chen, YZ
He, YB
Zhang, EH
[J]. IMPACT ENGINEERING AND APPLICATION, VOLS I AND II, 2001, : 663 - 668
[3] Low-Constraint Toughness Testing of Two Single-Edge Notched Tension Methods in a Single Specimen
Park, Dong-Yeob
Gravel, Jean-Philippe
Simha, C. Hari Manoj
Liang, Jie
Duan, Da-Ming
[J]. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2016, 138 (05):
[4] STRESS INTENSITY FACTOR AND COMPLIANCE SOLUTIONS FOR A SINGLE-EDGE NOTCHED SPECIMEN WITH CLAMPED ENDS
BLATT, D
JOHN, R
COKER, D
[J]. ENGINEERING FRACTURE MECHANICS, 1994, 47 (04) : 521 - 532
[5] STRESS INTENSITY FACTOR FOR A SINGLE-EDGE NOTCHED SPECIMEN SUBJECTED TO RESONANCE VIBRATION AT ULTRASONIC FREQUENCIES
MAYER, HR
TSCHEGG, SE
TAN, DM
[J]. ZEITSCHRIFT FUR METALLKUNDE, 1993, 84 (07): : 509 - 512
[6] On the fracture toughness testing for single-edge notched bend specimen of orthotropic materials
Huang, Yifan
Wang, Xin
[J]. COMPOSITE STRUCTURES, 2022, 281
[7] Experimental and numerical slip line analysis of welded single-edge notched tension specimens
Hertele, Stijn
Van Gerven, Filip
Naib, Sameera
Gubeljak, Nenad
De Waele, Wim
[J]. 21ST EUROPEAN CONFERENCE ON FRACTURE, (ECF21), 2016, 2 : 1763 - 1770
[8] Fracture toughness measurements using two single-edge notched bend test methods in a single specimen
Park, Dong-Yeob
Gravel, Jean-Philippe
[J]. ENGINEERING FRACTURE MECHANICS, 2015, 144 : 78 - 88
[9] A Wide Range Stress Intensity Factor Solution for Single Edge Notched Tension Specimen with Clamped Ends
Zhu, Xian-Kui
[J]. PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6A, 2017,
[10] Corrected stress intensity factor solution for a British standard single edge notched tension (SENT) specimen
Zhu, X. -K.
[J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (01) : 120 - 131

← 1 2 3 4 5 →